Back   PostHeaderIcon Viewing Shed Profile

jabiru's Mitsubishi Triton GLXR

 

• Make:

 

Mitsubishi

• Model:

 

Triton

• Series:

 

GLXR

• Year:

 

2008

• Transmission:

 

MANUAL

• Owned since:

 

01/2008

• Location :

 

MOONTA, SA

 

Modifications

ARB DELUXE WINCH BAR
ARB BEHIND GRILL AIR COMP
ARB HI ROOF CANOPY
SUPER VISION 8500 HID DRIVING LIGHTS
OME SUSPENSION (SPRINGS AND SHOCKERS)
BFG A/T 265X75X16 TYRES
FACTORY REAR DIFF LOCK
GME TX4400 UHF RADIO
FACTORY TOW BAR
AUSCRUISE
HEAD AND BONNET PROTECTORS
WINDOW TINT
TJM AIRTEC SNORKEL
DP CHIP
DUAL BATTERIES N70ZZ UNDER BONNET (TIGHT FIT)
OZI EXPLORER MAPPING HX 4700 PDA
ANDERSON AND CIG PLUG AT REAR OF TUB LINER
LIEMAK 70L FRIDGE/FREEZER
ELECTRIC BRAKE CONTROLLER
BARRETT 550 HF RADIO AUTO TUNE ANT MOUNTED ON L.H. FRONT
CORNER OF CANOPY S.STEEL CUSTOM BRACKET

 

Future Modifications

 

 

 

Other info:

 

SOME PHOTOS WEDGE ISLAND WEST OF YORKE PENINSULA EAST OF PT LINCOLN S.A. 3/2/08 TAKEN FROM JABIRU SPORT AIRCRAFT.
ARB COMP BEHIND GRILL PASSENGER SIDE 50?X3MM PLATE MOUNTED VERTICAL USED ORIGINAL TOP HOLE BENT PLATE AT RIGHT ANGLES DRILLED 6MM HOLE IN MID CROSS MEMBER PLATE (ONE WITH BIG HOLE) FOR BOTTOM HOLE AND BOLTED. REMOTELY MOUNTED AIR INTAKE UNDER BONNET.
Dual Battery based on Bussy's design. Only I used n70zz size battery 302mm long (federal marine AGM 92 ah) (Battery World) Projecta DBC 150 isolator. Used 30mm angle for tray so cables to motor run under tray this saves about 30mm so the big battery will fit just. Tray overall length suggest 622x185 (made mine a bit long and had to nip the corner off as it would rub on the intercooler hose. Since photos taken have added cross brace to back of tray and bolted to plate that supports fuel line on fire wall. moved large cable on fire wall up higher and remove bolt protruding from fire wall (used same clamps but in different location) (Shortened power steering pump hose about 40 mm on bottle end) see photos for details.

 
 

 

 
 

PostHeaderIcon Youtube Videos

PostHeaderIcon Profile Comments

welshy66

 

Comment:

14/05/09  

Just a quick one, hows the OME suspension going, I'm thinking of going with the same because the warranty is easier should you need it. Nice truck too, love the compressor fit.


MR T

 

Comment:

10/02/09  

any other good track near you other than the one to wallaroo allong the beach


subi_man

 

Comment:

26/02/08  

VERY nice work on the compressor install there mate :-)


jabiru

 

Comment:

12/02/08  

will take a couple of snaps for you Have the latest arb comp bought an extra 1/4 bsp 90 degree


subi_man

 

Comment:

08/02/08  

gday jabiru - do you have any pics of your air-compressor's location? cheers



Note: You must be logged in to place a comment on this profile.

Please log into the forum here!
Back


Profile Statistics
Username: jabiru
Member Since: 31-Jan-2008
Last logged in: 01-Jan-1970
Post Count: 16


Total Hits: 1985