Replacement Knobs (heater/fan/air)

[godzilla_rising]

Greeting all...

Would I be correct in assuming that the below knobs would be the ones I am after?

https://www.ebay.com.au/ulk/itm/331085054761

[Snooozy]

Greeting all...

Would I be correct in assuming that the below knobs would be the ones I am after?

https://www.ebay.com.au/ulk/itm/331085054761

that looks like the ones

[Sav]

Greeting all...

Would I be correct in assuming that the below knobs would be the ones I am after?

https://www.ebay.com.au/ulk/itm/331085054761

I just bought these as well

[MilkmanDan]

Word of warning on the Mazda ones. I've kept mine but needed some mods. May have been the Melbourne weather or just bad luck but the steel outers separated from the plastic, have wrapped plumbers tape on them and fixed the problem. All three had done it within 6 months.

Otherwise a great cheap mod imo

[DanAu]

Greeting all...

Would I be correct in assuming that the below knobs would be the ones I am after?

https://www.ebay.com.au/ulk/itm/331085054761

that looks like the ones

A word on these knobs:

I just received mine today and they don't appear to be right ones. They don't have the stalk at the back to plug them as per the first page.

[kouta666]

This is what I got last year. Fits perfectly. Stalk shown.

[Sav]

Greeting all...

Would I be correct in assuming that the below knobs would be the ones I am after?

https://www.ebay.com.au/ulk/itm/331085054761

that looks like the ones

A word on these knobs:

I just received mine today and they don't appear to be right ones. They don't have the stalk at the back to plug them as per the first page.

These don't fit mine either

[Sav]

This is what I got last year. Fits perfectly. Stalk shown.

Just bought some that look similar to this.

[godzilla_rising]

Great...

Oh well, in the end it was a small bit of cash and I'll just have to try and find the suitable ones next.

[micv]

Darn - when I saw you guys doing it I went and bought some too and they haven't even arrived yet.

[Cowboy Dave]

Meanwhile the seller is sitting somewhere wondering wtf is going on with suddenly increased sales

[Sav]

Darn - when I saw you guys doing it I went and bought some too and they haven't even arrived yet.

If the new set fit I'll post the link

[DanAu]

I bit the bullet and bought these ones (for future reference when the link dies the seller is topupauto):

http://pages.ebay.com/motors/link/?nav= ... 83&alt=web

These have the stalk attached and I guess importantly one stalk appears to be smaller. That knob itself looks smaller overall which is good because I noticed when trying to fit the other ones that they were too big for the middle knob and covered the dial partially.

I'll update if/when they arrive

[DanAu]

I bit the bullet and bought these ones (for future reference when the link dies the seller is topupauto):

http://pages.ebay.com/motors/link/?nav= ... 83&alt=web

These have the stalk attached and I guess importantly one stalk appears to be smaller. That knob itself looks smaller overall which is good because I noticed when trying to fit the other ones that they were too big for the middle knob and covered the dial partially.

I'll update if/when they arrive

Aaand they don't fit. The stalk's too short. I give up until someone confirms a seller

[Sav]

Mine fit

http://m.ebay.com.au/itm/321732411299

Sent from my HUAWEI MT7-TL10 using Tapatalk

[Sav]

Mine fit

http://m.ebay.com.au/itm/321732411299

Sent from my HUAWEI MT7-TL10 using Tapatalk

Sellers name (sohunew2013)

Sent from my HUAWEI MT7-TL10 using Tapatalk

[Sav]

Sent from my HUAWEI MT7-TL10 using Tapatalk

[DanAu]

Mine fit

http://m.ebay.com.au/itm/321732411299

Sent from my HUAWEI MT7-TL10 using Tapatalk

... alright I'll give another one a try!

[Sav]

Mine fit

http://m.ebay.com.au/itm/321732411299

Sent from my HUAWEI MT7-TL10 using Tapatalk

... alright I'll give another one a try!

Shaved 2 mm off the middle one

They look so much better especially at night

Sent from my HUAWEI MT7-TL10 using Tapatalk

[braydenc]

Mine fit to agree they are so much better then the standard knobs

2mm shaved off the middle one as its just a tad to long I also glued mine in for extra grip.

Sent from my SM-G900I using Tapatalk

[Longranger1]

Mine fit to agree they are so much better then the standard knobs

2mm shaved off the middle one as its just a tad to long I also glued mine in for extra grip.

Sent from my SM-G900I using Tapatalk

Interesting photo.

[braydenc]

Mine fit to agree they are so much better then the standard knobs

2mm shaved off the middle one as its just a tad to long I also glued mine in for extra grip.

Sent from my SM-G900I using Tapatalk

Interesting photo.

why is it interesting?

[Cowboy Dave]

I wondered the same but couldn't pick it - unless it was a reference to being sideways?

[braydenc]

I wondered the same but couldn't pick it - unless it was a reference to being sideways?

Thats what I was assuming

or my Pod gauge Placement

[RockoWallaby]

Nice mod. Thanks guys. They do look much better than the originals

Far as taking off the original knobs, I used a piece of stocking leg. Soft, squeezes in behind the originals, and pull out no damage and easy
And before you ask, no they're not mine I prefer fishnets

Bought them here, for anyone wanting the ones that fit. Bit more exy than originally posted, but I guess were all making then popular ;>

http://www.ebay.com.au/itm/231205554541 ... EBIDX%3AIT

A little slow on delivery, but came 4-5 weeks and at least they fit OK