www.newtriton.net

by **Harro** on Sat Mar 03, 2012 10:49 am

Nothing

by **Snooozy** on Sat Mar 03, 2012 11:21 am

my Tri sat in the rain while I surfed NTN :roll:

Website · by **fridgie** on Sat Mar 03, 2012 2:36 pm

Went for a run in glasshouse with Diablo and Bounce, 2 winchings and 2 uses of the drag chain... Good times

by **Diablo** on Sat Mar 03, 2012 3:37 pm

We tested out my lift today. As everyone else has said, ultimate put a great kit together for the triton :grin:

by **Cowboy Dave** on Sat Mar 03, 2012 6:42 pm

Emptied out the tub and removed the under rail tub liner. Then cleaned out all the dust that had accumulated underneath. After that I stared at it for a long time trying to work out the best way to tackle my next couple of projects. Couldn't quite bring myself to get out the drill and the nutserts but it is only a question of time now.

by **Duck** on Sat Mar 03, 2012 7:01 pm

Installed a LED bar light into the roof of the hard cover, fished the wires through the ribbing of the undercover so all nice & hidden & put in a fridge socket whilst I was in there. Now there is plenty of light for those night fishing expeditions !!! Always got annoyed at night with not beinga ble to see in the back tub, now I need to put my sunnies on to p[rotect my eyes. 18watts of flat daylight drawing .7amps an hour.

by **Earlyninja** on Sat Mar 03, 2012 10:01 pm

scraped out carbon buildup from intake manifolds. 2-3mm of crud everywhere from previous owner. Noticed an immediate change in throttle control afterwards + less smoke + faster turbo spool.

by **deermaster** on Sun Mar 04, 2012 9:50 am

Gave it a wash and then fitted chrome door handle covers I just brought through EGay. Amazing how they dress it up.

BEFORE

AFTER

by **peterdeg** on Sun Mar 04, 2012 9:59 am

Added some lighting to the tub. http://www.newtriton.net/phpbb/viewtopic.php?f=21&t=10738&p=244028#p244028

by **peterdeg** on Sun Mar 04, 2012 11:42 am

Mounted the extinguisher

by **davebo** on Mon Mar 05, 2012 5:46 am

finished the Aldi winch install yesterday

all seems to work ok! but i think i'll be swapping out the wire cable for some of that nice easy dyneema stuff at some stage!

by **motoz** on Mon Mar 05, 2012 5:37 pm

Fitted my new front springs so I'm back up to full lift (605mm)

Started fab on the RTT rack...

by **al coholic** on Mon Mar 05, 2012 5:44 pm

deermaster wrote:

I thought i was looking at my truck for a second there

Black GLX.....Alloy tray, TJM T15bar, brush rails, steps, spotties, aerial mounted on top of the bar, TRITON laser cut in the bash plate......

Only difference is you have those ghey chrome handles now

by **Mattstruck** on Mon Mar 05, 2012 7:23 pm

^^ Dont listen to him Deermaster. They look great. Hes just :mrgreen:

Now for the chrome mirrors

by **4WD Supplies** on Mon Mar 05, 2012 7:38 pm

Installed my Rooftop tent today, Can't wait to try it out on the weekend. Might need to visit the local fab/ scaffold shop to put in some extra supports for the canopy, just incase.

Website · by **fridgie** on Mon Mar 05, 2012 7:53 pm

deermaster wrote:Gave it a wash and then fitted chrome door handle covers I just brought through EGay. Amazing how they dress it up.
BEFORE

AFTER

Wish I had know you were going down that path

I'm looking for the black handles and mirrors, we could have swapped

It's the last of the 'shiny' bits other than the badges and I want them changed to black to match :ugeek:

by **deermaster** on Mon Mar 05, 2012 8:24 pm

al coholic wrote:
deermaster wrote:

I thought i was looking at my truck for a second there

Black GLX.....Alloy tray, TJM T15bar, brush rails, steps, spotties, aerial mounted on top of the bar, TRITON laser cut in the bash plate......

Only difference is you have those ghey chrome handles now

Don't tell me there's two the same, I already tried to get in someone else's vehicle one night when they parked a similar holden near mine. Embarresing stuff that when they catch you thinking your trying to steal their Ute. :roll:

Fridgie; Ha ha, I have already ordered the chrome door handle scratch pads that go in the dent behind the handles. Chrome mirrors were next on the agender.

PS I have paid for my snorkel so as soon as it arrives t will be next on the agenda to get it fitted.

by **Mrs Mooons** on Tue Mar 06, 2012 1:00 pm

It was more like what did I do to my Triton yesterday.......... I was allowed to start driving yesterday for the first time since my operation, it was so nice.

by **tezza08** on Tue Mar 06, 2012 1:04 pm

Good stuff Mrs Mooons

by **Snooozy** on Tue Mar 06, 2012 2:39 pm

Mrs Mooons wrote:It was more like what did I do to my Triton yesterday.......... I was allowed to start driving yesterday for the first time since my operation, it was so nice.

great to hear that Astrid.

now you can keep the car away from mooons & out of trouble

by **Mooons** on Tue Mar 06, 2012 2:40 pm

Snooozy wrote:
Mrs Mooons wrote:It was more like what did I do to my Triton yesterday.......... I was allowed to start driving yesterday for the first time since my operation, it was so nice.

great to hear that Astrid.

now you can keep the car away from mooons & out of trouble

Don't blame trouble he wasn't there :lol:

by **joelzo** on Tue Mar 06, 2012 7:05 pm

Wired up spotties after work. Lightforce seem a little forward of the factory nudge bar.

Might make up a plate each side to space them back a bit... Another day

by **Mattyjl** on Wed Mar 07, 2012 4:47 pm

Today I built and installed a high lift jack and shovel mount for the back of my Triton. Pretty straight forward, some aluminium square tube, a few bolts and a pair of quick fist clamps. then attached it to my "random stuff" carrier on the tray cover. A few pics:

Turned and to be very sturdy and rigid under the weight of the jack, works perfect and looks great.

by **motoz** on Wed Mar 07, 2012 4:52 pm

Looks great mate. Top idea on the hardlid.

Where did your get the 'quick fist' clamps ?

I'm after some for my RTT rack project.

by **Mattyjl** on Wed Mar 07, 2012 5:05 pm

Opposite Lock sell the whole range of Quick Fist clamps, those particular ones hold 25mm - 65mm diameter objects and were $17.50 for the pair, bargain! 8-)

Or if that fails, Fire and Emergency shops sell them as well for similar prices, they use them to hold axes, picks, etc...

www.newtriton.net

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

Re: What did you do to your Triton today?

What did you do to your Triton today?

Re: What did you do to your Triton today?

What did you do to your Triton today?

Re: What did you do to your Triton today?