What did you do to your Triton today?

[molesy]

i put an extra reversing light in the back bumper just gotta wait until dark to see how bright it is got a couple of pics in my shed

[4WD Supplies]

Pulled all last weekends camping gear out and loaded it with next weekends camping gear.

[TUFF TROOP]

Wired up more led lights in canopy, cleaned the interior, washed it, getting ready to leave Friday night haha

[Tim007]

Got my first real look at the new ARB deluxe bar today after picking it up on Friday evening only to notice that a big piece of the powder coat on the top of the drivers side hoop was gashed away and repaired with some touch up paint and a brush. Looks like a factory second bar and pretty poor attempt to repair it. Going back on monday to see what has to be done to put it right. Other then that I am happy i went black.

[fridgie]

Wouldn't be suprised if they did it during the install then tried to cover it up

Hope they either replace or give you some cash/goodies mate

[shotgun283]

Well i took Mum n Dad to lunch for Mothers day in the ML (Mum dosnt like the suspension lift, reckons it to hard to get in )

[viking shippy]

I'll throw up a post soon with what I have in plans.... Pics an all, just have to wait til my uncle returns what I have done, should stop these breaking I hope

my iner guards protrude a little past my arb bull bar side bash triangle thingy....
Some water crossings and smash shit em selfs.... Was going to glass up some fibre glass ones with the new ones I've bought from the steelers any one interested in some fibre glass inner guards........?..

[motoz]

I'm not sure fg would be the go as you have to twist and manipulate them while fitting.

Maybe rubber sheet would be the go.

[har05l]

Pulled off rear cover and bar from tub and then put it all back on again , in this I hope I have stopped all the leaks and dust proof better for future outback trips

Also ran some LED strip lights in the tub while I was at it, love the brightness

[Tim007]

Wouldn't be suprised if they did it during the install then tried to cover it up

Hope they either replace or give you some cash/goodies mate

Yeah I was trying to think about what is a reasonable amount of "credit" to accept if that is what they offer. I am doubting that they will be too keen on replacing the bar. But given the small plate that sits between the bar and the bash plate was for an MN and didn't fit (they are getting an ML one) and that on my way to Bribie yesterday I worked out my UHF is also not receiving any signal (they moved it to behind the right hand side hoop) and now the dodgy repair, it has been far from a great install.

[ag9111]

Wouldn't be suprised if they did it during the install then tried to cover it up

Hope they either replace or give you some cash/goodies mate

Yeah I was trying to think about what is a reasonable amount of "credit" to accept if that is what they offer. I am doubting that they will be too keen on replacing the bar. But given the small plate that sits between the bar and the bash plate was for an MN and didn't fit (they are getting an ML one) and that on my way to Bribie yesterday I worked out my UHF is also not receiving any signal (they moved it to behind the right hand side hoop) and now the dodgy repair, it has been far from a great install.

Surprise Surprise

[trickydevil]

Wasn't today but didn't get on here Friday

New Lightforce XGT240 with zenephot bulbs ( wish for HID's )
Old Hellas on the roof



New led's on the

[viking shippy]

Wouldn't be suprised if they did it during the install then tried to cover it up

Hope they either replace or give you some cash/goodies mate

Yeah I was trying to think about what is a reasonable amount of "credit" to accept if that is what they offer. I am doubting that they will be too keen on replacing the bar. But given the small plate that sits between the bar and the bash plate was for an MN and didn't fit (they are getting an ML one) and that on my way to Bribie yesterday I worked out my UHF is also not receiving any signal (they moved it to behind the right hand side hoop) and now the dodgy repair, it has been far from a great install.

a winch or rear bar or side steps hmmm
I got a free rear bar for a dent in my bull bar and a dodgy roof top tent and a I'll fitting inner bar for the canopy racks... Not to mention I'll fitting guard cut out that cracked the paint work so they removed the bull bar and fixed it all ....stick to your guns mate you paid the premium for quality now demand it!!!

[Custom Offroad]

Sorted!

[daryn]

Sorted!

Thanks....

[Tim007]

Wouldn't be suprised if they did it during the install then tried to cover it up

Hope they either replace or give you some cash/goodies mate

Yeah I was trying to think about what is a reasonable amount of "credit" to accept if that is what they offer. I am doubting that they will be too keen on replacing the bar. But given the small plate that sits between the bar and the bash plate was for an MN and didn't fit (they are getting an ML one) and that on my way to Bribie yesterday I worked out my UHF is also not receiving any signal (they moved it to behind the right hand side hoop) and now the dodgy repair, it has been far from a great install.

a winch or rear bar or side steps hmmm
I got a free rear bar for a dent in my bull bar and a dodgy roof top tent and a I'll fitting inner bar for the canopy racks... Not to mention I'll fitting guard cut out that cracked the paint work so they removed the bull bar and fixed it all ....stick to your guns mate you paid the premium for quality now demand it!!!

So as it turns out they were pretty keen to get me a new bar. It didn't seem like much of a drama but I won't be convinced until it is fixed to the front of my rig. I am waiting for the boss to see what it will cost to order another one and do it right and send the poor salesman back to me with some offer that is not a new bar.

[Tim007]

oh and a new HID kit for my Xray 220's. So now both driving and spot lights are upgraded what to do with fog lights

[motoz]

oh and a new HID kit for my Xray 220's. So now both driving and spot lights are upgraded what to do with fog lights

Keep them std incase you encounter some fog.

[fraz91]

oh and a new HID kit for my Xray 220's. So now both driving and spot lights are upgraded what to do with fog lights

Keep them std incase you encounter some fog.

or 3000K HID's. They're nice and yellow, so penetrate the fog well

[pyr081]

Picked it up from the dealers ... only took 11 weeks

[big_bob_thefirst]

Congrats!

[molesy]

i put on my MSA canvas seat covers on today i picked them up from arb i will have pics up in my shed soon
the good thing about them they have pockets in the back of them

[krazed]

installed the whispbars

[Mattyjl]

setup my new RTT which I picked up from Tigerz11 for $825, BARGAIN!





Now I just need to find some time to take it away!!

[motoz]

Nice one mate. You'll be stoked with the tent there a great thing.