What did you do to your Triton today?

[joelzo]

You bet. Sure is whistley!

[fraz91]

So far:
Tint done on front windows
Changed front coils
Oil change
Oil Filter Change
Washed exterior of Radiator and A/C Condensor
Washed exterior and interior of intercooler
Fixed another stripped bash-plate bolt

Still to be done:
Clean Unifilter
Replace rear drum brake shoes
Swap out passenger CV (boot is stuffed, have a new CV so will just throw that one in)
Clean inside and outside of car
Wheel balance, rotation and alignment.

Relatively productive today, if I do say so myself

[Calblitzen]

Got mine bogged in the sand as I got back to Rainbow Beach for Fraser, forgot to hit the ASC button. Self recovered in 10mins, the the Treads worked well.

[Bogor]

Went for a cruise through Mt Mee. Came back via the A break. It sure did seem tame after doing Club Rally at LCMP and the tracks at City View. Even the missus mentioned it did not seem all that scary anymore.
Put some LED strip lights on the inside of the bonnet, ran some wiring and tested it. Nice and bright. I just need to make it a little less dodgy

[DoubleD]

I fitted an Anderson plug to the tri today to keep the
cans cold whilst traveling!

[Mattstruck]

I fitted my auto meter boost gauge into the dash. Sweeet!

[Belbrook]

I fitted my auto meter boost gauge into the dash. Sweeet!

Pics?

[gauci204]

Gave the poor girl an oil change, fitted the fumoto valve whilst I was at it. Ran two radiator flushes then replaced the coolant after overheating her at New Years.

Also found another bash plate mount totally broken, so ill have to make up a couple of heavy duty ones.

[TUFF TROOP]

Some new parts ready for Long weekend

[Ivatriton]

I fitted an Electric Brake to my 2010 all but tapping into the brake pedal wire, there are 4, which one please?????

[wake jake]

Parents dropped it off for MR gear, brakelines, 90k service and radiator/intercooler flush while I'm in NZ. Be good to come back to a good driving ute Ironman sucks. Come back and install boost gauge and custom switch set up where old headunit was.

[rogjil]

Spent a few hours getting 2 weeks worth of Fraser Island sand off the Triton

[Mattstruck]

I fitted my auto meter boost gauge into the dash. Sweeet!

Pics?

I'll try. It's a pain in the butt but

[Cowboy Dave]

I fitted my auto meter boost gauge into the dash. Sweeet!

Pics?

I'll try. It's a pain in the butt but

Try sitting on the seat instead of the gear stick?

[Mattstruck]

Someones stalking me

[Greedy]

Spent a few hours getting 2 weeks worth of Fraser Island sand off the Triton

I wish.

[motoz]

Spent a few hours getting 2 weeks worth of Fraser Island sand off the Triton

I wish.

ImageUploadedByTapatalk1358110117.260914.jpg

[DoubleD]

Fitted my ARB Compressor under the bonnet &
ran the hose line for easy access to the nudge
bar mount.
(where to buy compressor rocker switch in Newy?)

[MN GLXR]

Finished off the dual batt install. Used a battery box in the tub, 100ah AGM battery and CTEK dual 250 s.


Cheers MN GLXR

[Kegsy]

Spent a few hours getting 2 weeks worth of Fraser Island sand off the Triton

I wish.

ImageUploadedByTapatalk1358110117.260914.jpg

Do you have a stormtrooper sitting in your back seat

[jarrod006]

Installed a reverse camera through the mmcs and fixed up my provent problem very productive

[Cowboy Dave]

What was the provent problem?

[TUFF TROOP]

Fitted and relocated my winch control box / solinoids , to under the bonnet and fitted remote control kit also.
Wired up my solar panels too. And hard wired from 2nd battery to a Anderson plug so can plug the solar panels straight to the battery easy!

[har05l]

Took it to mits for some tlc.

Ended up getting a software update to hopefully stop the underboost codes and also a new egr fitted.

Have left blank out for now and it's running like a dream

[webby52]

So far changed the tub for an alloy tray, had anderson plug and brake controller fitted in readiness to pick up the new van, and Thursday am having a complete Sax Technology 3SDS suspension package fitted.