Bakes' MN Build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Bakes' MN Build

Postby mithba on Tue Nov 25, 2014 12:43 pm

Hey guys,

Thought I would start a build thread here to document my progress, not only for myself, but so you fine ladies and gentlemen can offer any advice you might have.

2010 GLXR with 100K on the clock.

I have had the Triton for 3 months and have done the following to it in this time.

- The day I bought it. Used with
Click to view larger picture
Came with nudge bar and rear step, no tub liner or tow bar.


- First item on the agenda was to get some a/t tyres on it.
Click to view larger picture
General Grabbers AT2 - 265/65 R17


- Then it was time to give these tyres a go
Click to view larger picture
Didn't want to go to far as I was by myself, had work in 4 hours and was 2 hours from home.
Click to view larger picture
Didn't get stuck, got home, made it to work :(


- Next item on the agenda was a towbar
Click to view larger picture
I decided to take the rear step off as it decreased the departure angle when a towbar was put on. Still have it if anyone wants to buy it from me ;)


Then after a day at the 4x4 show I came away with a Bull bar, and roof racks fitted for $1700
Click to view larger picture
Very happy with the quality. Comes with a lifetime warranty and the roof racks will be put to good use.


I also bought a UHF combo pack from fleabay
Click to view larger picture
Never wired anything up in my life so its not the cleanest job but it works...
Click to view larger picture


I have got a trip down to the Warren River planned next fortnight so I will have to take some happy snaps while I'm down there.

Eventually will have a snorkel, lift kit, awning and possibly a canopy one day.

- Bakes
mithba
 
Posts: 5
Joined: Wed Aug 13, 2014 6:04 pm


 

Re: Bakes' MN Build

Postby lachiem on Tue Nov 25, 2014 2:30 pm

looks nice and clean mate
Something profound
Something funny
User avatar
lachiem
 
Posts: 406
Joined: Tue Jun 25, 2013 2:38 pm
Location: Wodonga VIC

Re: Bakes' MN Build

Postby Robby on Tue Nov 25, 2014 5:02 pm

Good price on the bar and racks what brand were they?

Cheers Robby
User avatar
Robby
Platinum Subscriber
 
Posts: 423
Joined: Fri Feb 07, 2014 9:30 am
Location: Adelaide

Re: Bakes' MN Build

Postby mithba on Tue Nov 25, 2014 5:24 pm

Bar is made by Parkside Towbars, a well known company in WA. Comes with a lifetime warranty.

Roof racks are heavy duty racks made my Rhino Rack.
mithba
 
Posts: 5
Joined: Wed Aug 13, 2014 6:04 pm

Re: Bakes' MN Build

Postby Robby on Tue Nov 25, 2014 5:48 pm

Thanks mate I have the same roof racks the bar looks good shame they are not here in SA
User avatar
Robby
Platinum Subscriber
 
Posts: 423
Joined: Fri Feb 07, 2014 9:30 am
Location: Adelaide

Re: Bakes' MN Build

Postby Cowboy Dave on Tue Nov 25, 2014 7:29 pm

Hard to pick from the photos but that front flare looks like it might be a bit close to the bullbar. Ideally you want a bit of a gap as the bar will move more than you expect when off-road and can pop the flare right off if you're unlucky. There's a video here somewhere with a go pro running as a car flexes which shows it really well.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: Bakes' MN Build

Postby mithba on Thu Nov 27, 2014 4:24 pm

Yeah there is only about 10-15mm between the bar and the flare. How much would be ideal?
mithba
 
Posts: 5
Joined: Wed Aug 13, 2014 6:04 pm


Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 17 guests