TJM T15 Fleet Bull bar Winch pictures

Bull bars, sliders, wheel carriers etc!

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Sun Oct 15, 2017 5:02 am

No problem.
Ill take the pics today.
the wiring on mine was just plug and play-no scotch locks!

Yes the bash plate had to come off.
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am


 

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Sun Oct 15, 2017 7:55 am

als1200 wrote:No problem.
Ill take the pics today.
the wiring on mine was just plug and play-no scotch locks!

Yes the bash plate had to come off.


Cheers
I have a feeling the guys at TJM might've set up the wiring.

Ok so sump guard has to come off. I assume it's just tighten as much as possible and doesn't require a specific torque?

There's just a couple of terms that I don't know what they are
- upper cross member I assume is that beam thing that crosses the radiator? Or is that the crash box? Does it come off?

Also can't get my head around the 'captive bolt' you need to put through. I know what a captive bolt is but I just can't visualise it. The instructions don't have a picture of it. :roll:
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Wed Oct 18, 2017 4:20 am

I havnt forgotten.

For some reason i can not get img Hostr to load?

If you pm me your email i will shoot them through
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Wed Oct 18, 2017 5:31 am

als1200 wrote:I havnt forgotten.

For some reason i can not get img Hostr to load?

If you pm me your email i will shoot them through

Cheers mate
Pmed
Really appreciate the help and effort!
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Wed Oct 18, 2017 6:12 am

Email sent.
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Wed Oct 18, 2017 3:41 pm

als1200 wrote:Email sent.

Cheers for the images. Very helpful.

Does the crash box stay on? I assume it does?

And did you follow the specific torque outlined in their instructions for each bolt or did you just tighten till they were tight?
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Wed Oct 18, 2017 4:36 pm

Not sure what you mean by crash box?.

I had no instructions.
if i could undo them with sockets and spanners they wernt overly tight.
i done them up and triple checked them with extensions on spanners/ sockets.
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Wed Oct 18, 2017 5:05 pm

als1200 wrote:Not sure what you mean by crash box?.

I had no instructions.
if i could undo them with sockets and spanners they wernt overly tight.
i done them up and triple checked them with extensions on spanners/ sockets.


This thing circled in red. Is yours still attached? Instructions say to remove the 'upper cross member' but I have no idea what that is.
Click to view larger picture

Also what do you mean by checking them with 'extensions'? Do you think it's necessary to tighten to specifications?
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Sat Oct 21, 2017 5:30 am

No mate. Thats not left on. Email sent.

If its recomended by the manufacturer- yes its important and should be aheard too.
i dont have a tention wrench.
I never had the fitting instructions.

what were the settings?
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Sat Oct 21, 2017 5:31 am

How did you post pics?
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby NowForThe5th on Sat Oct 21, 2017 7:48 am

Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 8206
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Sat Oct 21, 2017 9:06 am

als1200 wrote:No mate. Thats not left on. Email sent.

If its recomended by the manufacturer- yes its important and should be aheard too.
i dont have a tention wrench.
I never had the fitting instructions.

what were the settings?


Cheers just got the email and picture. It looks like there are things attached to it though, so I'm not sure how they took it off? I'm still struggling to get the entire bumper off. Been referring to the workshop manual but not used to reading those diagrams.
I can email you a copy of the instructions. They just have individual tensions for different bolt sizes.
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: TJM T15 Fleet Bull bar Winch pictures

Postby als1200 on Sat Oct 21, 2017 3:51 pm

Yeah that would be great.

I always just look for clips and bolts.

Looking at mine i would have left it on the car to cut.
just take your time. Itwill work out.
als1200
 
Posts: 122
Joined: Thu Aug 20, 2015 6:11 am

Re: TJM T15 Fleet Bull bar Winch pictures

Postby TheSheepKed on Sat Oct 21, 2017 4:12 pm

als1200 wrote:Yeah that would be great.

I always just look for clips and bolts.

Looking at mine i would have left it on the car to cut.
just take your time. Itwill work out.


Emailing to you now
User avatar
TheSheepKed
 
Posts: 131
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Previous

Return to Exterior Mods

Who is online

Users browsing this forum: No registered users and 1 guest