koshari wrote:-brake trigger to blue wire on brake switch (unplug the connector to make it a little easier to connect).
-ground wire with appropriate m8 connector to m8 stud above brake pedal holding brake assembly to firewall (use additional m8 nut as there is plenty of thread on that stud.)
-trailer signal obviously goes down the back to the trailer connector (run it inside one of the chassis rails).
-supply goes to battery via 20A re-settable CB.
use the spare bung (pop it and drill a little hole through it) in the firewall located to the left of where the steering wheel column goes through the firewall to run the trailer connector and 12v supply through.
i'm going to be cramped for space trying to wire to the brake pedal since i'm over 6' tall.
Users browsing this forum: No registered users and 14 guests