UN4GIVN wrote:Hey merts who makes the tray to fit the second battery tray to fit under the bonnet?
gazman152 wrote:What's the space like behind the seat in an MQ? Best spot in my opinion for a battery in the MN. Best with sealed AGM within cab. Battery stays cooler and it's one less thing in the tray.
Rustyau wrote:gazman152 wrote:What's the space like behind the seat in an MQ? Best spot in my opinion for a battery in the MN. Best with sealed AGM within cab. Battery stays cooler and it's one less thing in the tray.
Like this idea. Has anyone tried to put a 120ah behind the rear seat?
tomgwilson8 wrote:Hey guys, sorry I'm new to this so I'm not sure how to post the question. I noticed Dunga71 said that there is not smart alternator on the triton mq. I'm going to install some LED driving lights this week but I cant find anywhere to say if this will cause sensors to be tripped when I tap the remote wire on the wiring harness into the high beam wire. have you guys installed driving lights on the MQ triton and did you have any issues? any advice would be great
taurus577 wrote:Im going with this setup with the box mounted in the tray, basically plug and play;
http://www.australiandirect.com.au/buy/ ... 20/1543543
You really need to use a DC-DC charger as you won't get a full charge using a VSR
It looks like an interesting unit. It's rated to IP67 so should be ok with water crossings. I have the ctek D205s and it's been fine.Proof wrote:Has anyone used this DC to DC Charger
Users browsing this forum: No registered users and 4 guests