ML triton build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: ML triton build

Postby Stassy94 on Wed May 18, 2016 10:00 pm

Mayhem2015 wrote:Trying to pick the brand of snorkel. Where did that come from? Any comments?


ebay mate bought it for $100 and installed it myself, i love doing everything myself on my ute so its always a good challenge, great quality too used alot of sikaflex to just make it that extra bit better, done alot of crossings and havent had an issue :)
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW


 

Re: ML triton build

Postby Jacobie on Fri May 20, 2016 7:57 am

Banging Truck man, been eyeballing this on the FB page ahah. Keep up the mods!
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: ML triton build

Postby Stassy94 on Fri May 20, 2016 5:10 pm

Jacobie wrote:Banging Truck man, been eyeballing this on the FB page ahah. Keep up the mods!


not much to eye out :lol: thanks though mate!
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Sav on Fri May 20, 2016 8:06 pm

Xrox bar would look awesome on this

Sent from my Nexus 6P using Tapatalk
Sav
 
Posts: 139
Joined: Sun Apr 12, 2015 1:41 pm

Re: ML triton build

Postby Stassy94 on Fri May 20, 2016 9:46 pm

Yeah that's definitely on my list if I don't go custom front bar
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Duck on Sat May 21, 2016 11:50 am

With all your lights on the truck. shouldn't be an issue when the sun goes down :)
Life is what happens while you are busy making plans........
User avatar
Duck
 
Posts: 2002
Joined: Tue Feb 14, 2012 3:48 pm
Location: North Side Of Brisbane

Re: ML triton build

Postby Stassy94 on Sat May 21, 2016 5:28 pm

Mate it's amazing on night runs in the bush, absolutely love them all haha need a dual battery next to keep up with them :roll:
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Stassy94 on Sat May 21, 2016 7:44 pm

finished off the breathers today, was great fun........ (siliconed that hose after taking this photo) now trying to figure out what to do next :roll:

Click to view larger picture

Click to view larger picture
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Stassy94 on Tue May 24, 2016 7:49 pm

found something to do! upgraded my front grill... :lol:

BEFORE
Click to view larger picture

AFTER
Click to view larger picture
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Jacobie on Wed May 25, 2016 11:59 am

Stassy94 wrote:found something to do! upgraded my front grill... :lol:

BEFORE
Click to view larger picture

AFTER
Click to view larger picture


Looks wicked man. I was thinking of doing the same and adding like a little led light of some sort in there. not sure how I'd do it or what I'd use, but in my head it was wicked.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: ML triton build

Postby kouta666 on Wed May 25, 2016 12:15 pm

I cant tell what is going on with the grill. Have you just removed the fins?
User avatar
kouta666
 
Posts: 274
Joined: Sat Nov 02, 2013 8:20 pm
Location: Brisbane, Australia

Re: ML triton build

Postby Jacobie on Wed May 25, 2016 12:17 pm

kouta666 wrote:I cant tell what is going on with the grill. Have you just removed the fins?


Aftermarket mesh ones mate.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: ML triton build

Postby kouta666 on Wed May 25, 2016 3:08 pm

aha... very nice. :D I got all excited and was going to ask you where from and how much but my front is already chockers. So you wouldnt notice them

Click to view larger picture
User avatar
kouta666
 
Posts: 274
Joined: Sat Nov 02, 2013 8:20 pm
Location: Brisbane, Australia

Re: ML triton build

Postby Stassy94 on Wed May 25, 2016 4:50 pm

Jacobie wrote:
Stassy94 wrote:found something to do! upgraded my front grill... :lol:

BEFORE
Click to view larger picture

AFTER
Click to view larger picture


Looks wicked man. I was thinking of doing the same and adding like a little led light of some sort in there. not sure how I'd do it or what I'd use, but in my head it was wicked.


I see this awesome bt-50 every day who has the same type of grill as mine and he has 2 red LEDs inside going vertical so you just see a light shining it sounds abit weird and too much bling but honestly it changes the ute so much and it's not bright at all it awesome, 2 little $1 waterproof eBay LED strips, 1 $5 fuse holder, some cable and a switch and you're set ;) might do that next haha
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Stassy94 on Wed May 25, 2016 4:51 pm

kouta666 wrote:I cant tell what is going on with the grill. Have you just removed the fins?


They are on eBay from Thailand for about $70 from memory and trust me you definitely would notice them, would look good with your bar!
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby Quinny on Wed May 25, 2016 5:59 pm

I like the way it's coming together ;)
Never argue with an idiot ... they will drag you down to their level and beat you with experience ...
User avatar
Quinny
Platinum Subscriber
 
Posts: 5570
Joined: Tue Dec 09, 2008 8:19 am
Location: Brisbane, QLD

Re: ML triton build

Postby Stassy94 on Wed May 25, 2016 6:12 pm

Quinny wrote:I like the way it's coming together ;)


cheers quinny! need a bullbar by the end of year trips away though waiting for tax time :lol:
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Re: ML triton build

Postby kouta666 on Thu May 26, 2016 5:27 am

Stassy94 wrote:
kouta666 wrote:I cant tell what is going on with the grill. Have you just removed the fins?


They are on eBay from Thailand for about $70 from memory and trust me you definitely would notice them, would look good with your bar!


:D thanks
User avatar
kouta666
 
Posts: 274
Joined: Sat Nov 02, 2013 8:20 pm
Location: Brisbane, Australia

Re: ML triton build

Postby amyh4n on Thu May 26, 2016 10:25 am

Stassy94, Need a front bulbar :D
User avatar
amyh4n
 
Posts: 243
Joined: Wed Mar 09, 2016 9:36 pm

Re: ML triton build

Postby Stassy94 on Mon Jul 25, 2016 1:24 pm

amyh4n wrote:Stassy94, Need a front bulbar :D


heading towards an xrox!
Stassy94
 
Posts: 49
Joined: Fri Apr 03, 2015 11:43 pm
Location: Sydney, NSW

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 6 guests