salt36 wrote:I didn't have time to try and look for a photo but the drawing below shows the CV/axle seal circled in red.
There is a metal spring like coil inside the seal that can come loose. If it has I would replace the seal as they can and do leak.
There should not be anything else there that can come loose...
AC137 wrote:
If any one has a part number or dimensions to the following seal, would greatly be appreciated.
AC137 wrote:salt36 wrote:I didn't have time to try and look for a photo but the drawing below shows the CV/axle seal circled in red.
There is a metal spring like coil inside the seal that can come loose. If it has I would replace the seal as they can and do leak.
There should not be anything else there that can come loose...
If any one has a part number or dimensions to the following seal, would greatly be appreciated.
ultimate wrote:Yes Fraz has the bursons CV. It fits both the ML and MN where as the Repco one just fits the ML. At the moment I prefer the Bursons one but only time will tell. Genuine is still the best for long term use.
Return to Drive Train Components
Users browsing this forum: No registered users and 14 guests