by ultimate on Mon Dec 24, 2012 9:02 am
I don't have any Raw4x4 boots, but believe it may be similar in concept to our Navara boots. I have taken a quick photo below to show how it's laid out. You should have the washer that the boot sits on. Ontop of this there should be a small washer to fill the gap and finally a larger curved washer to sit under the bush. This will locate everything properly and stop the bush pushing the boot off.
To be honest I prefer to use the original Triton dust boots and washers. They are only a half boots but work well depending on the type of seal used on the strut.
The dust boot hanging down is more aesthetic concern than anything. As long as you get in and clean around it, you will not have any issue with it sitting down over the Christmas break.
You do not have the required permissions to view the files attached to this post.