G'day all. New to the forum.. I have an MQ
Tow bar wiring harness from an ML so has the relays for the brake and tail light to patch into main harness. Also has the twin power /neg wire.
It's easy to just run the twin wire to battery and she's all good but I'm fussy and want ti access the main wiring factory loom sockets.
1 Factory loom has 3 wires (yellow, brown/& yellow, blue near on a 3 pin plug N/S shock absorber which runs up under passenger seat to near side kick panel. There is also a single blue wire in the main harness which is an accessory live. (my guess electric brake signal wire.)
2. Looks like there should be a short cable from the 3 pin in kick panel area to a 4 pin plug which has occupied wires pink/ blue /green/ white black stripe.
White black stripe is 12v active.
..
3. Those wires go to near side headlight which has only the 3 main colours blue/pink/green and missing the white black stripe.
I am looking for the plugs /wiring diagram to see which wires are for what so I can find correct plugs to use the factory harness capability. It's too easy to just run the twin cable from the relay harness straight tho the battery..
Anyone
been through this..?
Mitsubishi seem to have component B and C which may be correct but hey want $350 for a tow bar harness. Lol.