Single battery Auxillary Filter Installation

Single battery Auxillary Filter Installation

Postby Prospector on Sat Aug 17, 2019 11:51 am

Without buying into the different methods of filter setups,Ive included a pic on my own setup using a universal (no bracket supplied) Fuel manager on a 2wd MN triton. Making or adapting your own bracket gives a considerable saving over a custom fit kit. Bracket I have used is a wall mount from a Jamec-Pem hose reel . It uses the vacant 8mm threaded inserts above the twin ABS relays. A hat style bracket allows the wiring loom and brake vacuum line to remain relatively undisturbed. Minor sorting only required. Short runs of hose are another advantage of mounting close to factory filter. Universal kit provides a meter of hose and two straight 1/4 BSP x 8mm barb brass hose fittings. Supercheap have a champion branded 90 degree elbow version which is required if using filter downstream of factory unit on outlet only. Hope this helps someone out there.https://i1156.photobucket.com/albums/p5 ... =1:1,smart
User avatar
Prospector
 
Posts: 5
Joined: Sat Apr 20, 2019 8:27 am


 

Return to Fuel Systems

Who is online

Users browsing this forum: No registered users and 1 guest