The Newbie Help Thread

New to the site? Introduce yourself!

Re: The Newbie Help Thread

Postby Painkiller on Thu Jul 30, 2015 6:37 pm

Been a lurker for a while, Thanks tho- good info on here. Sometimes hard to know where to start. So much to learn.... So much to spend. So little time!
Last edited by Painkiller on Thu Jul 30, 2015 6:42 pm, edited 1 time in total.
'Don't just stand there watching, ask if you can help'
So much to learn, so little time...
User avatar
Painkiller
 
Posts: 27
Joined: Thu Jul 30, 2015 3:15 pm


 

Re: The Newbie Help Thread

Postby Cowboy Dave on Thu Jul 30, 2015 6:41 pm

Yeah it's a bit overwhelming, no doubt.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: The Newbie Help Thread

Postby Painkiller on Thu Jul 30, 2015 6:43 pm

Yep. Have to say I just love my Triton. Already.
'Don't just stand there watching, ask if you can help'
So much to learn, so little time...
User avatar
Painkiller
 
Posts: 27
Joined: Thu Jul 30, 2015 3:15 pm

Re: The Newbie Help Thread

Postby Painkiller on Thu Aug 13, 2015 4:06 pm

What I'm looking for atm are fitouts for the tubs of vehicles like mine. Best use of space, accessibility with the side windows etc. I've made a start of some drawers, where would I find pics of other DIY setups? I refuse to fork out big $ for something I can make myself- mightn't look as pretty but does the same job. Attaching drawers to the tray? What have others done?I put some pics of humble beginnings in shed.
One other question- my knees are uncomfortably close to the steering wheel when changing gears (with boots on), but the wheel is as far up as if goes and the seat as far back as is comfortable. Is there a solution for that?
Last edited by Painkiller on Thu Aug 13, 2015 4:18 pm, edited 1 time in total.
'Don't just stand there watching, ask if you can help'
So much to learn, so little time...
User avatar
Painkiller
 
Posts: 27
Joined: Thu Jul 30, 2015 3:15 pm

Re: The Newbie Help Thread

Postby snowman on Thu Aug 13, 2015 4:16 pm

best trolling through some of the build threads mate.

i used nutserts drilled into the tray where i could not get the existing holes to line up and some angle brackets to hold mine down but i have a 'best offroad' unit.

in my opinion you don't need massive fit off capacity. I think i used four locations (2 forward and 2 rear) with probably M8 or 10 bolts. Never moved yet.
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: The Newbie Help Thread

Postby Painkiller on Thu Aug 13, 2015 4:21 pm

By 'existing holes' you mean? I have a tub liner, can't see any holes- pull that out? I was thinking only 4 points anyway. I was thinking I might just drill some... bottom up of course. Nutserts go in the ply, right?
'Don't just stand there watching, ask if you can help'
So much to learn, so little time...
User avatar
Painkiller
 
Posts: 27
Joined: Thu Jul 30, 2015 3:15 pm

Re: The Newbie Help Thread

Postby snowman on Thu Aug 13, 2015 4:37 pm

why have a tub liner with drawers? it is costing you depth.

nutserts go into the tub floor not the plywood.

you are going to need to drill through the tub liner.
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: The Newbie Help Thread

Postby Painkiller on Thu Aug 13, 2015 4:45 pm

Good point... tub liner was there when I bought it, one of those plastic ones.Will pull that out and have a look, cheers. I sign up next pay... And find the right place to post ;) oops
'Don't just stand there watching, ask if you can help'
So much to learn, so little time...
User avatar
Painkiller
 
Posts: 27
Joined: Thu Jul 30, 2015 3:15 pm

Re: The Newbie Help Thread

Postby kxboss on Thu Aug 13, 2015 5:22 pm

snowman wrote:best trolling through some of the build threads mate.

i used nutserts drilled into the tray where i could not get the existing holes to line up and some angle brackets to hold mine down but i have a 'best offroad' unit.

in my opinion you don't need massive fit off capacity. I think i used four locations (2 forward and 2 rear) with probably M8 or 10 bolts. Never moved yet.



Where do you get nutserts from ? heard of them haven't been able to buy any.

Can I give some to my mate he needs some nuts LOL.
kxboss
 
Posts: 421
Joined: Tue Feb 19, 2013 12:33 pm

Re: The Newbie Help Thread

Postby snowman on Thu Aug 13, 2015 5:24 pm

kxboss wrote:
snowman wrote:best trolling through some of the build threads mate.

i used nutserts drilled into the tray where i could not get the existing holes to line up and some angle brackets to hold mine down but i have a 'best offroad' unit.

in my opinion you don't need massive fit off capacity. I think i used four locations (2 forward and 2 rear) with probably M8 or 10 bolts. Never moved yet.



Where do you get nutserts from ? heard of them haven't been able to buy any.

Can I give some to my mate he needs some nuts LOL.


here are some examples. The small rivet type gun is very hard when using steel nutserts in the larger sizes.

http://www.ebay.com.au/bhp/nutsert-tool
Last edited by snowman on Thu Aug 13, 2015 6:27 pm, edited 2 times in total.
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: The Newbie Help Thread

Postby Cowboy Dave on Thu Aug 13, 2015 6:25 pm

Painkiller wrote:Good point... tub liner was there when I bought it, one of those plastic ones.Will pull that out and have a look, cheers. I sign up next pay... And find the right place to post ;) oops


There are some existing holes with screws in them. 3 each side towards the rear and some across the front. They might be useable but pull the liner and see what you think.

The Arb drawers use bolts through locations where there is a cross bar underneath so as to give you double thickness of metal to secure to.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: The Newbie Help Thread

Postby Moink71 on Thu May 19, 2016 8:43 am

G'day Guys,
I'm newbie to this site, just trying to get my head around the workings.
I've not long purchased a ML 3.2L 4M41 Auto Olympic edition.
She now has a MN Tray, tow bar and Canopy.
TJM Bull bar.
Reversing camera fitted to a double DIN head unit, Bluetooth, DVD.
Light Bar.
UHF Radio.

It was going like a train until last week.
Now chasing fuel issues (Suction control valve/ECU)
Wish me luck
Moink71
 
Posts: 2
Joined: Thu May 19, 2016 8:10 am

Re: The Newbie Help Thread

Postby Naff on Thu May 19, 2016 9:22 am

Good thing about these 3.2s is that it's almost always confined to a couple of issues and they aren't that expensive to fix.
User avatar
Naff
Platinum Subscriber
 
Posts: 4770
Joined: Sat May 17, 2008 2:00 pm
Location: Brisbane, QLD

Re: The Newbie Help Thread

Postby Jacobie on Thu May 19, 2016 10:59 am

Moink71 wrote:G'day Guys,
I'm newbie to this site, just trying to get my head around the workings.
I've not long purchased a ML 3.2L 4M41 Auto Olympic edition.
She now has a MN Tray, tow bar and Canopy.
TJM Bull bar.
Reversing camera fitted to a double DIN head unit, Bluetooth, DVD.
Light Bar.
UHF Radio.

It was going like a train until last week.
Now chasing fuel issues (Suction control valve/ECU)
Wish me luck


Mate this isn't the one with the Matte kamo sorta colour is it?!
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: The Newbie Help Thread

Postby rodwb57 on Sat Jun 25, 2016 9:36 pm

By the way I know you are supposed to introduce yourself :? in the introduction area, But I could not find it
rodwb57
 
Posts: 4
Joined: Sat Jun 25, 2016 8:45 pm

Re: The Newbie Help Thread

Postby snakesoup on Sat Jun 25, 2016 9:46 pm

lol welcome mate, heaps of info here for ya if ya look around, sounds like ya bus has got some snot !!
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: The Newbie Help Thread

Postby Sapper63 on Tue Sep 06, 2016 2:35 pm

Hi I am a new triton owner MN single cab 4x4 enjoy reading all the topics hope I can provide input
Sapper63
 
Posts: 2
Joined: Mon Sep 05, 2016 9:33 pm

Re: The Newbie Help Thread

Postby Mickie on Tue Jul 25, 2017 11:43 am

Hey guys,

I have an MN TRITON 2015 and wondering if anybody has noticed the ABS comes on when turn corners or acceleratting, also I've noticed an engine "knocking" sounds in the engine when starting on a cold morning and during floating ( neither averaging or bracking eg at a set of lights) the knocking. Just wondering if someone could link some more thread or article to help me, called a couple of dealership and they aren't to concerned about t

Thanks in advances
Mickie
 
Posts: 1
Joined: Tue Jul 25, 2017 11:34 am

Re: The Newbie Help Thread

Postby NowForThe5th on Tue Jul 25, 2017 3:30 pm

It's not ABS (anti-lock braking system) but ASC (active stability control) that you're feeling. The ASC cuts engine power when it thinks you might be in a skid. Can be interesting when you're trying to get into a gap in the traffic and there's a B-Double bearing down on you.

It's common to confuse the two and also common to experience the problem. Turn the ASC off if you're in what might be one of those situations, or go a bit easier on the loud pedal.

All diesels clatter. Some more, some less. Mitsubishi diesels are in the former category.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9242
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: The Newbie Help Thread

Postby Suep on Fri Aug 11, 2017 7:35 pm

Attn ADMIN please Hi I have just register on behalf of my husband. He has had an account on this forum for several years however he has forgotten his login details. Are admin able to assist him to retrieve this information.
Suep
 
Posts: 2
Joined: Fri Aug 11, 2017 7:29 pm

Re: The Newbie Help Thread

Postby Suep on Fri Aug 11, 2017 9:57 pm

Ok so I have located his account , reset password and he is back into his account :D
At one stage I was considering changing his user name to cranky man :lol:
Suep
 
Posts: 2
Joined: Fri Aug 11, 2017 7:29 pm

Re: The Newbie Help Thread

Postby Mattyo76 on Sun Nov 05, 2017 9:58 pm

Hey guys. I'm new to the site. I am chasing a set of seat spacers to suit mn triton and cannot find them anywhere. Can someone please help with this?
Mattyo76
 
Posts: 1
Joined: Sun Nov 05, 2017 9:39 pm

Re: The Newbie Help Thread

Postby explorer.dave on Sun Nov 05, 2017 10:19 pm

Mattyo76 wrote:Hey guys. I'm new to the site. I am chasing a set of seat spacers to suit mn triton and cannot find them anywhere. Can someone please help with this?


Yes, welcome to the forum for a starters, second, use the "search forum" function, enter "seat spacers" and your question will be answered.
Better to be silent and thought a fool than open your mouth and remove all doubt.[

[b]Penrith Panthers 2021..Finally :roll:


Posts should be like mini skirts, long enough to cover the subject matter, but short enough to keep things interesting
User avatar
explorer.dave
Platinum Subscriber
 
Posts: 977
Joined: Wed Dec 18, 2013 9:32 am
Location: South Lake, Perth

Re: The Newbie Help Thread

Postby Ronnie58 on Mon Mar 19, 2018 10:28 am

hi all, recently i made the decision to buy my first ute, first 4wd, so i walked into the dealership and bought myself a 2017 triton exceed, i figured if im going to do this why not go all the way! now i just need to learn how to use the thing!!! thats where all you nice folks come in...glad to be here!
Ronnie58
 
Posts: 3
Joined: Mon Mar 19, 2018 10:12 am

Re: The Newbie Help Thread

Postby Ronnie58 on Mon Mar 19, 2018 11:14 am

hi, also new to utes and 4wd, my new exceed has a dif lock, so what is it and why is it good to have ?
Ronnie58
 
Posts: 3
Joined: Mon Mar 19, 2018 10:12 am

PreviousNext

Return to Introductions

Who is online

Users browsing this forum: No registered users and 1 guest