What did you do to your Triton today?

[motoz]

You get the idea

I reckon you would be due for a filter change after the last couple of weeks

Sure we're mate. I'm still guttered that about the mechanic snagging the rubber filter edge when the last service was done. That dust trail up the side of the air box lid made me a little angry!!!

NTBB sold me on the Uni Filter when I had a look at his rig. I got the full kit with a three pkt of the 'droopie' type pre filters for those dusty SA conditions.

[Camo31]

I fitted an anderson plus at the rear next to the trailer plug. Now ready to pull the boat.

Also found out canopy is in stock. Can't wait for that bad boy.

[O-doggz]

Rotated the tyres.... 9500km, first time the wheels have been off and a wheel stud snaps NOT HAPPY!!!! Will be standing at Eagers doorstep Monday morning when they open.

[motoz]

Had to put the stock wheels and tyres back on. The cut in the sidewall of one of the ATZ's started to leak.

A tyre with 50% tread left in the bin. The front two are sawtoothed as the alignment was out 9 deg...

With three out of four tyres needing replacing it hasn't been a good day.

One positive though with the stock hoops back on it actually goes, turns and stops now !!!

Taking off from the lights I've got to back off sooner as on a couple of times today it hit 80km/h. I'd forgotten how much the 33's took out.

I'm thinking a new set of Cooper ST MAXX in 265/75 x 16 will be going on very soon.

[TUFF TROOP]

Washed it first time since Easter and cleaned interior out ready to wire up some more goodies

[Sky Miner]

Pulled my EGR blank out....got a 2nd limpy today 2nd one in 2 days gonna see how it goes
might leave it out for awhile.
Might put it back in after my next service at 45000k's with the 6mm hole

[Morgs n Jess]

Ultimates raised comfort kit is in. Made a hell of a difference just coming outta the drive way so can't wait to get the alignment done and put it to the test. Easiest kit I've ever installed to anything

[mad992]

Pulled my EGR blank out....got a 2nd limpy today 2nd one in 2 days gonna see how it goes
might leave it out for awhile.
Might put it back in after my next service at 45000k's with the 6mm hole

mate 6mm hole solved my limpy problem

[Sky Miner]

mate 6mm hole solved my limpy problem

Im gonna leave that one alone

[timbo]

Haven't driven mine for 2 weeks, took her out today and found the carpet on the drivers side was dripping wet. Looked around and found the grommet near the fuse box was leaking, very strange considering i haven't done anything to that one. Sealed it up now just got to dry the carpet. Then washed it this afternoon

[Floda]

Installed a Unifilter and boxed up the original for posterity. Got some prices on a bar and snorkel mostly phone work though.

[nuklz]

Sold the piece of shart! Farewell snotbox!!!

[motoz]

Sold the piece of shart! Farewell snotbox!!!

I say that every other day !!!

Better the one you know and if you can't be with the one you love... Love the one your with !!!

[Tim007]

Dyno tune with the new chip in. Goes a lot harder. Just need to modify the waste gate a bit more and she will be done. Fitted bonnet protector and ordered new TJM T13 bar.

[nuklz]

Sold the piece of shart! Farewell snotbox!!!

I say that every other day !!!

Better the one you know and if you can't be with the one you love... Love the one your with !!!

I do love the one im with motoz, her name is Land cruiser!!!

[motoz]

Sold the piece of shart! Farewell snotbox!!!

I say that every other day !!!

Better the one you know and if you can't be with the one you love... Love the one your with !!!

I do love the one im with motoz, her name is Land cruiser!!!

Yes a 200 Series in on the top of my wish list. One day.

[joelzo]

Fitted projector 'hawk eye' headlights from thailand.

[Sky Miner]

Yes a 200 Series in on the top of my wish list. One day.

Oh what a feeling........good luck

http://www.ohwhatalemon.com/

[motoz]

Cleaned the MAF sensor, removed a big heap of mud that was stuck inside the front bar (will have to keep an eye on that as it could be a rust point if left unchecked)

Added three more 12v sockets to the rear of the cab and made up a LED strip light to go under the bonnet to light up the engine bay. Just need to get a pin switch to finish the install.

[Greedy]

made up a LED strip light to go under the bonnet to light up the engine bay. Just need to get a pin switch to finish the install.

Thanks for the idea.

[motoz]

made up a LED strip light to go under the bonnet to light up the engine bay. Just need to get a pin switch to finish the install.

Thanks for the idea.

Want me to get you a switch while I'm at Jaycar ?

[Greedy]

made up a LED strip light to go under the bonnet to light up the engine bay. Just need to get a pin switch to finish the install.

Thanks for the idea.

Want me to get you a switch while I'm at Jaycar ?

If you find something suitable. Cheers

[irwazza]

Motoz, got any photos of the light bar install?

[motoz]

Motoz, got any photos of the light bar install?

It's just a length of flexible strip light. I'll be adding all the info in my build thread soon.

[Brent1]

Fitted projector 'hawk eye' headlights from thailand.

Wow mate, it looks awesome! Will be interested to hear what you think of the light output