Can't find it? Ask here FIRST, before you start a new thread

[Cowboy Dave]

Unfortunately I'm on tapatalk so I can't do that

One of these threads might lead you to the one you're thinking of:

http://www.newtriton.net/phpbb/viewtopic.php?f=23&t=1338&p=20597&hilit=rear+bar#p20597

http://www.newtriton.net/phpbb/viewtopic.php?f=85&t=5306&hilit=rear+bar

http://www.newtriton.net/phpbb/viewtopic.php?f=85&t=14519&hilit=rear+bar

Other than those 3, can you remember any other details that might prompt someone's memory for the thread you were looking for?

[Probz]

It was a white qld car and the mounts look like they were cnc plasma cut which is why I was looking for it as I was going to see if he had cad files for the mounts

[gusdale]

Hey dudes, are there any topics on replacement head units for the MN?
I am after one with a gps and reversing camera.

Cheers

[Cowboy Dave]

Search on digoptions and you will see one good thread for headunits at least. Try also brash imports. After that it's more random.

I'd search stuff like clarion, pioneer, alpine etc to find one off posts about installs people have done.

There's also a thread about audio options or something along those lines. Can't remember the name and can't search properly on the phone at the moment

[variflex]

Think Digioptions is the one your thinking of Dave,

[Cowboy Dave]

Nah it was about alternatives and there was a lot of chat about the double stacker hood thing.

[Cowboy Dave]

Here it is: http://www.newtriton.net/phpbb/viewtopic.php?f=21&t=16825

[rxbren]

had a search but not found anything.
on my 2006 2.5 did i have got alot of tyre wear on both front wheels going to get wheel alignment sorted (after replacing the front shocks as both have failed within 2 months) is there a "best" setting for the camber rather than the factory setting

[Trity13]

Hi guys, have searched and cant see anything on this issue. Have a 2013 MY with a bonnet protector (genuine). At roughly 100ks it starts this really anoying wind wistle sound which is driving me mad. Not sure if it is the protector or around the screen. Have another 6 hours of hwy driving tomorrow and love to be able to sort it out.

[Crash486]

Change the airflow somehow would be my suggestion. Good ole duct tape here and there. Will at least let you isolate the noise.

[senkans07ml]

Hey guys. I was wondering if there was any info on a top mount intercooler (tmic) conversion

[Cowboy Dave]

Hey guys. I was wondering if there was any info on a top mount intercooler (tmic) conversion

It's been mentioned once or twice but the conclusion usually is that it is less efficient that the existing front mount position.

[dig_options]

Hey dudes, are there any topics on replacement head units for the MN?
I am after one with a gps and reversing camera.

Cheers

Hi mate, please let me know what MN you have (year model and variant) and i can recommend a model for you to look at
Cheers,
Matt
digoptions.com.au

[Kingjw2001]

Attention admin, I have a wanted and I'd like to remove but I am unsure how to do it.
Can someone help me out?

[NowForThe5th]

Fixed.

For the record, Classified Ads, including changes, must to approved by a Moderator. the usual procedure is to PM a Mod who can make the changes for you.

[Kingjw2001]

[Jivometric]

Hi, been searching for a bit now and can't seem to find an answer that fits. Happy to be wrong....
I just picked up a late 11 MN GLX and am really liking it. It is an auto and my query is if it is normal in this vehicle for the transmission casing where the drivers left leg rests to get fairly warm to hot pretty quick? Seems to stabilise but definitely producing some heat there.

Ta, Troy

[explorer.dave]

I have a 12MN GLX auto, there will be heat generated, from my experience nothing that has caused discomfort or worry, do you have carpet? I do, so may make a difference.

[Jivometric]

Thanks for the reply. It is carpeted. It's not a massive concern, Im just new to this vehicle and checking as much out as possible while under statutory warranty (for whatever that may be worth). It is definitely warm as I first posted, but if it's just how they run then I'll look into further shielding as the way I sit in the cab I find it distracting on my leg and ends up making me avoid resting there.

[explorer.dave]

Thanks for the reply. It is carpeted. It's not a massive concern, Im just new to this vehicle and checking as much out as possible while under statutory warranty (for whatever that may be worth). It is definitely warm as I first posted, but if it's just how they run then I'll look into further shielding as the way I sit in the cab I find it distracting on my leg and ends up making me avoid resting there.

If you are concerned there is a thread in regards monitoring auto transmission temps with an Ultra-gauge, sorry, bit of a hurry at present otherwise would have found the link for you.

[Cowboy Dave]

Yeah it does get warm. My atf gauge suggests it runs as hot as 125c when really working hard so it's bound to transfer a bit upwards.

I've been meaning to shield that bit too so make sure you tell us what you use - if it works

[feckinirish]

Adding LED lights to the interior of my canopy.

I have an LED light in my canopy which as most do, has three settings. Off/On/Door Open.

What I want to do is place some LED strips internally around the canopy and also on the inside of the outward opening windows so that they shine light unto the ground when opened at night. I have a 2nd battery already installed at the back of my single drawer so I wanted my LED strips wired to that. What I also wanted to do was to have the switch on the existing LED light turn off/on the new LED strips. I was thinking a cable from the existing light to a relay that was placed between the LED strips and the 2nd battery could be a way to do that.

Is this a good idea?
Which cable would I connect to given that the middle connector in the image below was always live regardless of the position of the switch.



The existing LED light is wired to the main battery.

[meataxe]

Hi Guys,

First of all this is a great forum, I have been lurking here for a couple of years since I bought my 2013 MN.

Recently I have moved from Perth to Sydney (Drove ) and I am looking for any recommendations for a mechanic. I would like to find an independent for the mid services (52250 atm) and a dealer for the major services. I have used the search feature and have found Zetland City Mistubishi as a recommended dealer but not much information from the last year or so.

Apologies in advance as I am sure this is a frequently asked question, I thought I would post here in order to get up to the minute info

Thanks

Meataxe.

:: edit :: I'm located in the Inner West but I would be willing to travel good distance for the right mechanic.

[kcdusk]

Guys, quick one.

Can this bar (ARB deluxe bar) take a winch?

IMG_0789 by kcpics73, on Flickr

[Cowboy Dave]

Guys, quick one.

Can this bar (ARB deluxe bar) take a winch?

Yes. Should be what that cutout is for in the centre towards the bottom