Can't find it? Ask here FIRST, before you start a new thread

[rokster]

Snorkels.. I was given an Ironman snorkel.. only problem is it is for a diesel ML, and I have a petrol.. Would it fit ? Or is it two completely different designs ? Thanks !

[NowForThe5th]

Yes, it will fit. Airboxes are identical.

More info here:
http://www.newtriton.net/phpbb/viewtopic.php?f=3&t=12805&p=307661&hilit=snorkel#p307661

[L200Shogun]

2011 Factory diff lock fitted. Just normal diff oil?

beats me how you search for diff oil.

[NowForThe5th]

"diff*oil"

I thought you were a search king.

[ag9111]

2011 Factory diff lock fitted. Just normal diff oil?

beats me how you search for diff oil.

Go to the index of the service manual. Look up lubricants. Away you go .

[L200Shogun]

2011 Factory diff lock fitted. Just normal diff oil?

beats me how you search for diff oil.

Go to the index of the service manual. Look up lubricants. Away you go .

My 2013 MN does not have a "diff lock" My book doesn't mention a oil for a diff lock.

I believe it doesn't matter you can use normal or LSD type oil. I like to be correct when giving advice to others. I take it none of you know the answer off the top of your head. I have seen the answer in a post on here. Beats me if I can find it again. Mostly I search. When stuck I ask a question often I wonder why.

Thanks for the search tip 5th.
A little search help and I find my answer.

viewtopic.php?f=22&t=17260&hilit=diff*+oil+%2C+lock*

[Tas-Daz]

Hi can anyone send me a link for MK 2005 triton workshop manual
Have found one link but wouldn't open as Mac or iPad
Also couldn't find a paper copy at Autobarn today
Any help appreciated
Daz

[NowForThe5th]

http://www.l200forum.com/t3286f112-On-line-Classic-Workshop-Manual.html

These guys have a lot more knowledge on MK and prior than we have here.

[hooty]

Hi

Would like to unplug my ECU before doing some welding , anyone point me in the right direction of where its located.

Thanks

[4wd26]

Hi

Would like to unplug my ECU before doing some welding , anyone point me in the right direction of where its located.

Thanks

up high in the passenger side foot well, on the side

[explorer.dave]

This may help.
Clicky for full picture.

[hooty]

Cheers mate, thanks.

[meataxe]

There was a bunch that I used back when I was living in Castle Hill.. can't remember their name but I'll try my best with directions.. They are in the Castle Hill trading zone - off of Victoria Ave. I think it was 8 Victoria Ave - drive all the way to the back - you'd have a Pack'nSend on your left, Abbey Archery on your right further down. Their workshop was all the way at the back - you'd basically drive right into the workshop if you keep going. Neatest workshop I've ever seen - they went above and beyond fixing up an old 80 series I had, sourcing and adapting parts from other models as was needed.. even waived some labour charges when things were really crap on my side.. Can't recommend them enough, wish I can find someone similar in Perth..

I ended up taking your advice and got the service done at Zec's.
Reasonable price and very happy with the service. Would recommend. Thanks.

[Kingjw2001]

Does anyone know the socket size for an MN wheel nut?
I know stud size is 12x1.5 and should require an 18mm I think. But need to be sure before I go ahead and order one.
Thanks in advance.

[mattz]

The socket for alloy wheel nuts is 21mm I'd assume steel would be the same.

[Kingjw2001]

Much appreciated mattz

[tondo12]

Hi,
Im hoping someone can help me out with a dual battery tray. I've seen the prices on ebay and I think thats a bit much for just the dual tray. If anyone knows where I can get 1 at a good price that would be great.
2013 MN GLX dual cab.
Under bonnet im looking for.

[veom]

Is there a thread on ute boxes or something similar? I'm looking for some sort of permanent storage box to put in my tub.

[NowForThe5th]

Is there a thread on ute boxes or something similar? I'm looking for some sort of permanent storage box to put in my tub.

http://www.newtriton.net/phpbb/viewtopic.php?f=51&t=11969 from Search 'storage tubs'

http://www.newtriton.net/phpbb/viewtopic.php?f=18&t=15175 from Forum Directory

I've seen the prices on ebay and I think thats a bit much for just the dual tray.

Ring you local ARB store to put the Ebay prices into perspective.

http://www.newtriton.net/phpbb/search.php?keywords=dual+battery+tray&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search

More targeted but possibly leaving out some. See the DIY option near the bottom of the first page of results:
http://www.newtriton.net/phpbb/search.php?keywords=dual+battery+tray+price&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search

[rokster]

What does everyone use to mount their sand-flags on ? Do you get a quick release mounting ? Or do you need to struggle with nuts and spanners each time ?

[NowForThe5th]

Guys, the title of this thread does not say "ask questions here".

This thread is for use by people who are trying to find information and have tried searching for it, but haven't found it.

Rokster, search "sand flags mount". If you get no result then you may start a new thread which you can title "Sand Flag Mounts" so that others can find it later.

[Tony81]

I have both the asc and traction control lights come on in the dash and they won't turn off. Nothing has happened out of the ordinary I haven't been off road I haven't turned them off. There are no marks on the fuse box in the engin bay.

Any one have any ideas???

[Naff]

I have both the asc and traction control lights come on in the dash and they won't turn off. Nothing has happened out of the ordinary I haven't been off road I haven't turned them off. There are no marks on the fuse box in the engin bay.

Any one have any ideas???

Nothing visible around the wheels where the abs ring is? I remember a couple of people finding the wires had snagged and eventually pulled.

[Cowboy Dave]

Do you have anything plugged into the obd port? There's a code from there - P1901 - that can cause those to light up.

[Tony81]

I have both the asc and traction control lights come on in the dash and they won't turn off. Nothing has happened out of the ordinary I haven't been off road I haven't turned them off. There are no marks on the fuse box in the engin bay.

Any one have any ideas???

Nothing visible around the wheels where the abs ring is? I remember a couple of people finding the wires had snagged and eventually pulled.

Thanks naff I'll check that, I haven't been off road in ages though so don't know how or what they could have snagged on unless Brisbane roads are worse than I thought

Do you have anything plugged into the obd port? There's a code from there - P1901 - that can cause those to light up.

I don't have an obd scanner, I'll check that code number out though thanks