Hi guys,
I've been lurking the forum for years, every time I have an issue with my triton really. I have a 08 glxr model and I've had gremlins with the electrical for years. I get engine codes for MAF, MAP and fuel pressure sensors daily and have for quite a long time. I usually just use the scan tool to clear them and be on my way. My air intake temperature bounces from -10 degrees to 50 degrees within the second, throttle position sits either on 20.8 or 100, never in between. My cruise control stopped working a few years ago and now I'm driving from Brisbane to Cloncurry monthly I decided to try to get it working again. (No cruise light on dash at all for years). I replaced the clock spring and that did nothing. Using wiring diagrams I found the power wire to the cruise switch and it had no power coming from the ecu. I decided to jump 12v directly to that switch to see what happens and it worked. I removed my jump wire and it is still working but I still get the usual engine light and error codes. This leads me to believe my ecu is faulty (and every single error code diagnostic has faulty ECU as a possibility). I have bought a second hand ecu, I'm just wondering if anyone has information on reprogramming it to work with my car as I've seen some info about the etacs , keys/ immobiliser etc. Or if anyone knows of anyone in Brisbane who can do it??
Thanks guys