Switching Bullbar Indicators to LED - Relay or Resistor Req?

[Fishtank]

Have a TJM bullbar on 2012 MN and need to replace the indicators on the front of the bar. TJM no longer make the globe type and only have LEDs.

Will I have any problems switching them over to LEDs, or will I need a relay or resistor to prevent hyper flashing?

I believe they are currently tapped into the car's indicator wiring (still globes).

[NowForThe5th]

You'd need to check with TJM but, generally, if the indicators are a self-contained unit, as most for bull bars are, then they'll work with 12V. Usually it's just the globe replacement type that need resistors.