Whirring noise from front end. MN triton

Engines, Gearboxes, Transfers, Tailshafts, Diffs, axles and CVs

Whirring noise from front end. MN triton

Postby Justfitz on Sun Jun 04, 2023 7:54 pm

Hi there.
I've got an issue with the front end of my 2013 MN triton that has me a little stumped.
I bought the the car 3 months ago with the noise there, thinking it was simply a wheel bearing, but after I replaced them on the front and the swaybar links and bushes, wheel alignment and balance, the noise is still there.
I have scanned through the site looking for possible fixes but so far nothing matches.

There is a whirring noise and a slight vibration that starts at around 40km and gets progressively worse until about 70km-80km. Then the road noise drowns it out.

I'm running standard suspension with 265/75/16 tyres on steel king's wheels.

The noise was there when I had The standard wheels and 245/70/16 tyres fitted but the noise came on between 50kms and 80km - 90kms... A slight difference.
I had a mechanic check the centre bearing in the tail shaft and the diff bearings and even he was stumped, he mentioned it might be just uneven wear on the tyres.

The only other thing that might play a part in this was that The standard bash plate was bent in when I checked it( but those bash plates will bend if you look at them funny)

My next thoughts are
Ball joints
Bent axle
Control arm bushes
Cv's

I'm new to the site and to tritons in general so any thoughts on what this could be would be helpful.
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm


 

Re: Whirring noise from front end. MN triton

Postby DibbyDibbyDJ on Sun Jun 04, 2023 8:10 pm

What tread pattern are your tyres?
2024 Outlander

mitsubishi-forums.com
DibbyDibbyDJ
 
Posts: 462
Joined: Mon Oct 07, 2019 8:16 pm

Re: Whirring noise from front end. MN triton

Postby Justfitz on Mon Jun 05, 2023 4:49 pm

I'm running Hankook dyna pro at
Previously I had bf Goodrich at.
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm

Re: Whirring noise from front end. MN triton

Postby RHKTriton on Mon Jun 05, 2023 5:39 pm

From what you've described, things going through my mind include

Harmonic balancer, crook CVJ or bent shaft as well as possibly a crook disc brake rotor.

With the bent bash plate, I'd start by checking the rotors. May be something stuck in the vents.
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4750
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Whirring noise from front end. MN triton

Postby DibbyDibbyDJ on Mon Jun 05, 2023 7:27 pm

Justfitz wrote:I'm running Hankook dyna pro at
Previously I had bf Goodrich at.


Are we talking chunky tyres then? With big tread?
2024 Outlander

mitsubishi-forums.com
DibbyDibbyDJ
 
Posts: 462
Joined: Mon Oct 07, 2019 8:16 pm

Re: Whirring noise from front end. MN triton

Postby Justfitz on Thu Jun 08, 2023 1:21 pm

RHKTriton wrote:From what you've described, things going through my mind include

Harmonic balancer, crook CVJ or bent shaft as well as possibly a crook disc brake rotor.

With the bent bash plate, I'd start by checking the rotors. May be something stuck in the vents.


Didn't think of the rotors. I'm get them looked at and machined now.

While it's up on the houst I did notice There's is some grease around the CV boot that connects to the hub on the drivers side
It could of run dry but would that cause a whirring noise?
Hmmmm. Well that is next on the " what could it be list" I guess.
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm

Re: Whirring noise from front end. MN triton

Postby Justfitz on Thu Jun 08, 2023 1:23 pm

DibbyDibbyDJ wrote:
Justfitz wrote:I'm running Hankook dyna pro at
Previously I had bf Goodrich at.


Are we talking chunky tyres then? With big tread?


They are chunky but the tread is more of a road style than a mud style.
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm

Re: Whirring noise from front end. MN triton

Postby Justfitz on Fri Jun 09, 2023 4:13 pm

So I've gotten the rotors machined and no change.
Cv's next thing to check.
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm

Re: Whirring noise from front end. MN triton

Postby NowForThe5th on Fri Jun 09, 2023 9:58 pm

This is crazy. You're going to spend a fortune doing stuff you don't need to do.

Whirring noises generally don't come from CVs. They go click when going around corners.

Take it to a mechanic and get it diagnosed. Even if you have to pay him an hours' labour it will work out cheaper than chasing your tail fixing stuff that it might be, but probably isn't.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9242
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Whirring noise from front end. MN triton

Postby Justfitz on Tue Jun 20, 2023 7:12 pm

NowForThe5th wrote:This is crazy. You're going to spend a fortune doing stuff you don't need to do.

Whirring noises generally don't come from CVs. They go click when going around corners.

Take it to a mechanic and get it diagnosed. Even if you have to pay him an hours' labour it will work out cheaper than chasing your tail fixing stuff that it might be, but probably isn't.


I agree with you on this. I'm not a fan doing things that don't need to be done.

Before posting here I did take it to one mechanic who thought it was the left wheel bearing so he replaced it.
Didn't change.
He Suggested wheel balancing, alignment and rotation.
Didn't change
After that I took it to another mechanic who thought maybe it might be the right wheel bearing ( neither bearing had play in them but maybe just faulty).
Still didn't fix it.
Then he went over the whole under side checking tail shaft bearings and other stuff.
He finally said it might just be tyres.

There is a damaged CV boot which makes me think it might be that.

There's no play or movement that shouldn't be there.
After that mechanic looked at it and couldn't figure it out, That's when I decided to post here to see if anyone had had a similar problem.

Planning to replace the CV this weekend so fingers crossed.

Thanks to everyone who responded and gave their thoughts and ideas. Much appreciated :D
Justfitz
 
Posts: 6
Joined: Wed Feb 15, 2023 3:55 pm

Re: Whirring noise from front end. MN triton

Postby ajai01niner on Thu Jun 27, 2024 4:38 pm

Hey did you ever find out what's the cause of your issue? i had a similar issue with my 09 3.2 triton.
ajai01niner
 
Posts: 2
Joined: Wed Nov 08, 2017 8:06 pm
Location: Phlippines

Re: Whirring noise from front end. MN triton

Postby ajai01niner on Fri Jun 28, 2024 2:58 pm

Justfitz wrote:
NowForThe5th wrote:This is crazy. You're going to spend a fortune doing stuff you don't need to do.

Whirring noises generally don't come from CVs. They go click when going around corners.

Take it to a mechanic and get it diagnosed. Even if you have to pay him an hours' labour it will work out cheaper than chasing your tail fixing stuff that it might be, but probably isn't.


I agree with you on this. I'm not a fan doing things that don't need to be done.

Before posting here I did take it to one mechanic who thought it was the left wheel bearing so he replaced it.
Didn't change.
He Suggested wheel balancing, alignment and rotation.
Didn't change
After that I took it to another mechanic who thought maybe it might be the right wheel bearing ( neither bearing had play in them but maybe just faulty).
Still didn't fix it.
Then he went over the whole under side checking tail shaft bearings and other stuff.
He finally said it might just be tyres.

There is a damaged CV boot which makes me think it might be that.

There's no play or movement that shouldn't be there.
After that mechanic looked at it and couldn't figure it out, That's when I decided to post here to see if anyone had had a similar problem.

Planning to replace the CV this weekend so fingers crossed.

Thanks to everyone who responded and gave their thoughts and ideas. Much appreciated :D



Did you ever found out what caused the Whirring noise??? i currently am also experiencing this situation right now.
ajai01niner
 
Posts: 2
Joined: Wed Nov 08, 2017 8:06 pm
Location: Phlippines


Return to Drive Train Components

Who is online

Users browsing this forum: No registered users and 2 guests