Some info on Triton Drive train

Engines, Gearboxes, Transfers, Tailshafts, Diffs, axles and CVs

Re: Some info on Triton Drive train

Postby NowForThe5th on Sat Feb 04, 2017 3:09 pm

They might take it, but for how long?

The new Aisin auto box on the Pajero (and Pajero Sport) is the same as the Parado box and it's rated for 500Nm. The boxes used in the Tritons aren't as good as that one so, if you're running very high torque expect some problems at some point down the track.

Of course there's a safety factor built in to any manufacturer's specification, but you don't know how much this is.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9242
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT


 

Re: Some info on Triton Drive train

Postby thebaton on Wed Mar 28, 2018 9:22 am

Anyone ever swapped the auto box for a better one?
thebaton
 
Posts: 66
Joined: Sat Jun 18, 2016 10:32 pm

Re: Some info on Triton Drive train

Postby L200Shogun on Tue Jun 23, 2020 11:38 am

With regards to reduction gears.
MN GLX 11/13 build date. Manual
How do you determine what "generation" gears to order from Marks?

is this what I want
Mitsubishi Gen2 Low Range Gears 66% - 3.15:1 Reduction - Manual

Mitsubishi low range gears - ratio 3.15:1 - manual gearbox

To suit:

Generation 2 transfer case - 27 tooth (spline) input gear

Montero
Pajero
Shogun
Triton
Delica
L200, L300

$1,595.00

Part Number: PAJ-GEN2-3.15M
User avatar
L200Shogun
 
Posts: 827
Joined: Tue Nov 04, 2014 8:48 am
Location: Perth WA

Re: Some info on Triton Drive train

Postby terbangtinggi320 on Thu Oct 08, 2020 8:44 pm

terbangtinggi320 wrote:
Homer wrote:No mate but you'll probably feel a little bit of power loss...although there will still be plenty. Also probably some fuel economy too, but those are the trade off's for 33's ;)
Homer wrote:No mate but you'll probably feel a little bit of power loss...although there will still be plenty. Also probably some fuel economy too, but those are the trade off's for 33's ;)
I'm edho from Indonesia, in indonesia domestic market there's a 3 type MQ triton,

1. Exceed (1:3917 FG ratio)
2. Gls (1:4111 FG ratio)
3. HDX (1:4661 FG ratio) also known base model

I would like to replace 34 inch tire so that would require a lower gear ratio, anybody know about this issue?

Is that possible I change the gear ratio?
The best final gear ratio for a 34 inch tire is 1:4661 which is that's a HDX FG's..is that possible I change a HDX FG to my exceed MQ triton?
terbangtinggi320
 
Posts: 1
Joined: Thu Oct 08, 2020 8:19 pm

Re: Some info on Triton Drive train

Postby kat00 on Wed Jan 27, 2021 4:25 pm

L200Shogun wrote:With regards to reduction gears.
MN GLX 11/13 build date. Manual
How do you determine what "generation" gears to order from Marks?

is this what I want
Mitsubishi Gen2 Low Range Gears 66% - 3.15:1 Reduction - Manual

Mitsubishi low range gears - ratio 3.15:1 - manual gearbox

To suit:

Generation 2 transfer case - 27 tooth (spline) input gear

Montero
Pajero
Shogun
Triton
Delica
L200, L300

$1,595.00

Part Number: PAJ-GEN2-3.15M


Anyone know the answer to this because I'm keen on some reduction gears. 09 2.5 MN Manual
Marks has both the 66% and 40% in stock as of today but say the only way to identify if theirs will fit in to drop the case and measure the input gear.

For what its worth I've got a 12 bolt diff centre, no LSD. I've done a VIN look up to identify the OEM axle and further enquiries confirm it is a 31 spline axle so that means the centre must be 9.5"
The diffs in these things are all over the place and that is why I want some confirmation if Marks reduction gears will suit before shelling out. I'm not keen on dropping the transfer case on spec.
Anyone care to chime in?
kat00
 
Posts: 1
Joined: Sun Sep 20, 2020 11:14 am

Re: Some info on Triton Drive train

Postby tomdej on Wed Jan 27, 2021 8:09 pm

I recently got the Marks 2.7:1 gears fitted. The workshop I use has fitted a number of them in other Tritons and they had to open the transfer case and check the spline before ordering the correct kit.

It looks like you will need to do similarly.
tomdej
Platinum Subscriber
 
Posts: 48
Joined: Sat Apr 30, 2011 9:48 pm

Re: Some info on Triton Drive train

Postby FQCODEL on Sun May 02, 2021 7:27 pm

If I change the rear diff from 3.6 to 3.9, do I need to change the front? if it's optional, is there any advantage in doing so?
FQCODEL
 
Posts: 28
Joined: Sun Apr 04, 2021 9:19 am

Re: Some info on Triton Drive train

Postby NowForThe5th on Sun May 02, 2021 8:00 pm

FQCODEL wrote:If I change the rear diff from 3.6 to 3.9, do I need to change the front?


Not if you don't mind the two ends, turning at different rates, destroying your transfer case / gearbox.

FQCODEL wrote: is there any advantage in doing so?


Couple of grand a day? But you know the old saying...

A gearbox a day keeps the mechanic at bay
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9242
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Previous

Return to Drive Train Components

Who is online

Users browsing this forum: No registered users and 4 guests