Replaced rear step; covering holes?

[Seana]

I know I saw it on the boards a long time ago, but I've had a good search and can't find any reference to it now.. so wondering if somebody can help me out.

After a recent accident I've replaced my MN rear step and factory grader with a TJM RB6 (couldn't be happier). Problem is now I've got these obvious holes (where I guess the rear step bolted through. Just wanted to see if anybody had any good cover-up ideas. Looks like it's 'incomplete' according to the wife.

Cheers Sean

[ag9111]

Red reflector
Aluminium Chequer plate
Mounting hole for LED reversing light.

[Cowboy Dave]

Or the little black plastic things they fitted to the povvo packs. Or maybe they're rubber. Either way.

[ag9111]

Mine comes with rubber stoppers

[NowForThe5th]

I know I saw it on the boards a long time ago, but I've had a good search and can't find any reference to it now.. so wondering if somebody can help me out.

No specific thread, Sean, but quite a number of references to the problem and various solutions in this search:

http://www.newtriton.net/phpbb/search.php?st=0&sk=t&sd=d&sr=posts&keywords=cover+holes+rear

[kouta666]

I used 3 plastic clips. (each side) The ones you use to hold the inside of your wheel arch plastics. Had to buy some replacement ones after snapping off the originals. Only a few bucks from banggood.com

Looks ok I reckon.

[mattz]

I got some small coach bolts and bolted them though the holes then painted the heads with touch up paint.

[motoz]

I cut mine off. You don't need those bits.

[Seana]

Thanks everybody for the suggestions, a set of red reflectors from supercheap for $10 did the trick nicely (thanks ag911).

Might also help the next idiot see my invisible triton before he ploughs into the back of me...

Cheers Sean

[kouta666]

Got a pic of it now Seana?

[Seana]

Was going to do that (but adding a photo isn't easy here). OK, so I spent the 5 minutes and here she is