Aggressive Stance

[snowman]

I tried an individual 285/75r17 BF goodrich km2 the other day it looked hectic but when turning the front only misses the guard inside the front wheel arch by a couple mm's. I have a 2" suspension lift. Just worried about scrubbing in front. Pretty sure this tyre is classed as 33

what was the rim width and offset?

[4wd26]

need to check the tyre size again as well- that size as you wrote is 34"
reasonably rare size....

usual
285/75/16 or
285/70/17
both the above run to 33" or near 830mm diameter.

rim width and offset has a lot to making 33" tyres work in our tritons, will fit with standard offset but you won't get the aggressive stance (or track width stability benifits)

the further out the rims go (agressive) the more problems with the tyres hitting the guard.

[Homer]

Yep it can't be out near zero (where they look better) or it would be rubbing big time.

[reeldreamer]

I've got 285/65 R18 or 33 x 11.5 on a 8.5" rim with +30 offset and they just rub. It's often a trade off bigger tires less offset or in kyles case just got the guts out of the wheel arch and your away

[CALMAN09GLXR]

Running on the standard 17 " rim +32mm offset I think. Il try upload a photo.

[motoz]

MN rolling on 16x8 0 offset with 285/75 x 16 MT ATZ's

[reeldreamer]

Looks good mate! How does it go at full lock? Any rubbing?

[motoz]

Looks good mate! How does it go at full lock? Any rubbing?

There was slight rubbing with the wheels at 45 deg and mild flex. I performed a little inner guard massage and all seems well.

[reeldreamer]

Looks good mate! How does it go at full lock? Any rubbing?

There was slight rubbing with the wheels at 45 deg and mild flex. I performed a little inner guard massage and all seems well.

I could imagine what the inside of the wheel arch looks like

I just had to trim a bit off the mud flap!

[motoz]

I could imagine what the inside of the wheel arch looks like

I just had to trim a bit off the mud flap!

Doesn't look too bad to be honest.



If I can sell the 285's I'll buy some 265's and all will be sweet.

[EvanP246]

MN rolling on 16x8 0 offset with 285/75 x 16 MT ATZ's

Truck looks tuff man. I'm still accumulating funds for my aggressive setup.
Now I've decided to go with the same Pro Comp wheels I mentioned before with 32" M/Ts and Ultimate's 2" lift kit.
Hopefully within the next 2 months I'll have parts bought and installed.

Post more pictures of your aggressive setups guys! These trucks look awesome.

[motoz]

New bling in a 17x8 0 offset !!!

[kwyjibo]

Sexy... the next photo better be with big fat wheels on the Tri!

[motoz]

Sexy... the next photo better be with big fat wheels on the Tri!

There being shipped out at the mo. 255/80x17 KM2's me thinks.

[helicoptercow]

Sexy... the next photo better be with big fat wheels on the Tri!

kwyji your still alive

[Homer]

New bling in a 17x8 0 offset !!!

So you imported these rims motoz, or bought them locally?

[kwyjibo]

.

[kwyjibo]

Sexy... the next photo better be with big fat wheels on the Tri!

kwyji your still alive

Yeah the missus hasn't killed me yet, waiting till I get the life insurance I think :-?

[mattz]

Noice
I can wait to see them with tyres and fitted.
I bet you can't wait either.

Btw......who is delivering them?