www.newtriton.net

by **Hagen** on Wed Jan 30, 2008 5:40 am

can anyone help me. i put in ironman susention with 50mm lift and now i have bad shuttering on takeoff till 2000rpm. the suspention mob just gave me 2deg shims. they helpped a bit but now its my problem. anyone have any ideas or can steer me to someone in melb that can help?

by **Magilla** on Wed Jan 30, 2008 6:17 am

Yikes, Hagen.
There has been some talk about shudder on take off so i guess someone who has been lucky enough to lift yet may have some answers.

by **Austblue** on Wed Jan 30, 2008 8:59 pm

I'll try and have a dig around but I think it was tritor that mentioned he had the same problem

by **Austblue** on Wed Jan 30, 2008 9:03 pm

http://www.4wdmonthly.com.au/forum/f49/ml-triton-shuddddddder-41980/index3.html[quote] [b]written by tritor[/b]

shudders caused by bad pinion angle on the diff.. i have 3 of these cars.. the single cab has slight shudder from factory.. when theres load in the back it goes away..my triton is lifted 55mm.. has it reall bad.. didnt have it before.. ive since put 2 degree camber wedges in the back.. its almost gone away nownever bothered fixing it.. need to rotate the diff to get the right pinion angle on the front of the diff,however from factory it shouldnt do it unless youve raised it [/quote]

by **Austblue** on Wed Jan 30, 2008 9:15 pm

Has anyone else had problems after raising?

by **Urshtnme** on Wed Jan 30, 2008 9:35 pm

Nah I had no problems but I did get a laser alignment done and noticed a massive difference. Try that before hitting up the fitter.

by **Austblue** on Thu Jan 31, 2008 12:52 am

Hmm you're up 40mm plus carrying around a bar I wonder if that's keeping your drive shaft angle close enough?

by **Bubbalucci** on Thu Jan 31, 2008 8:19 pm

i got ome and have a shudder on take off in first i dont know much mechanically but i was gonna take it back to the fitters see what can be done ill keep you informed

by **Austblue** on Thu Jan 31, 2008 8:41 pm

ARGH!!! Scary! I just organised to pick up the dobinsons kit this morning!

The guy I spoke to knew of the vibrations but thought that it was only occuring in cars that had some vibration already IOW the lift just made it more noticeable. Now mine doesn't have any vibration and I wont be leaving the kit in there if it does

by **Austblue** on Thu Jan 31, 2008 8:41 pm

ARGH!!! Scary! I just organised to pick up the dobinsons kit this morning!

The guy I spoke to knew of the vibrations but thought that it was only occuring in cars that had some vibration already IOW the lift just made it more noticeable. Now mine doesn't have any vibration and I wont be leaving the kit in there if it does

by **Buzzy** on Thu Jan 31, 2008 9:18 pm

We heard ya the first time Austblue 8-)

by **rick** on Thu Jan 31, 2008 11:22 pm

i had the iron man kit fitted last week and all is a ok, no noticable power loss or bad vibbs...must be lucky i guess

by **Hagen** on Fri Feb 01, 2008 5:29 am

when i spoke to ironman i was told theyd done 100 new tritons and only 2 had vibration, one being mine . iii let everyone know if i fix it

by **Buzzy** on Fri Feb 01, 2008 5:53 am

If they have done 100 new tritons where are they?? Ya would think there would be more on here.

by **Austblue** on Sat Feb 02, 2008 12:59 am

Have a look at the thread over at 4WD monthly there's a guy there who works for mits and is supposed to be sending me a copy of the fix report for the shudder.

www.newtriton.net

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem

suspension problem