Oils aint Oils

[mff64]

when i was talking to Aussie(Synforce) back in April he said they have a deal with Aust post to freight it out.
I would give them a call.

[smouch1975]

So......

What are people running in their MN 2.5HP, if they can't get the Synforce stuff???

[Cowboy Dave]

Valvoline 5w40 synthetic - the white container.

[Longranger1]

Penrite HPR 5 Diesel synthetic (5w-40).

[Snooozy]

^^^^^ x2

[gregned]

Penrite HPR 5

[mad992]

does any1 know where aussie is
and any1 using his synforce oil

[Cowboy Dave]

and any1 using his synforce oil

Have a look at the SA oil group buy thread, a couple of posters there got some delivered.

[Racer]

I see Penrite HPR15 Diesel has changed its specs....

Density at 15oC, kg/L 0.872
Viscosity, Kinematic, cSt
at 40oC 150
at 100oC 20.1
Viscosity Index 155
Cold Cranking Viscosity, cP at -20oC 5,686
Zinc, Mass % 0.122
Phosphorus, Mass % 0.110
Sulphated Ash, mass % 1.22
Base Number, mass % 9.4

[Kegsy]

Yeah Im using the synforce. Only had it in for about 1,000kms so can't really give much feedback, but Im pretty confident in it from what I've read and the specs.

Send them an email, they'll give you a quote to ship directly to your door. Really easy.

[mff64]

I am using it in the NP and ML, all good so far.
Will be interesting to see what the oil lab tests results are when the time comes
I bought my oil from TJM in Townsville.

[mad992]

i sent synforce an email 2 weeks ago for a quote
still havent had a reply yet
what gives not very good for business aye
will resend email i think
cause i want to try cruiser oil

[sim_r32]

I was emailing them last week and ordered some on Thursday they were pretty quick to get back to me with the emails..

[mad992]

I was emailing them last week and ordered some on Thursday they were pretty quick to get back to me with the emails..

whats their prices like sim

[sim_r32]

1 Litres $9.19 +gst
5 Litres $33.28 +gst
10 Litres $67.01 +gst
20 Litres $128.19 +gst

[mad992]

1 Litres $9.19 +gst
5 Litres $33.28 +gst
10 Litres $67.01 +gst
20 Litres $128.19 +gst

cheers for that

[mad992]

1 Litres $9.19 +gst
5 Litres $33.28 +gst
10 Litres $67.01 +gst
20 Litres $128.19 +gst

ok finally tracked down some cruiser oil theres a shop here on coast that sells it so i bought 20ltrs
now wait for 30000klm service next week some time

[Greedy]

Hi all

Sorry to drag up an old topic but does anyone know how I can get Synforce oils in SA. I have asked around a few places but got no positive results. I looked on the website and there is no way to order over the net

Cheers

Bill

I tried contacting them directly months ago but didn't even recieve a reply. Might try again and see if they've improved

[Kegsy]

Greedy, try this email address. I had a reply very quickly. Sherrie was the lady who looked after me.


Sherrie King
Chief Administrative Officer
07-41253531
Synforce (Aust) Pty Ltd
admin@synforce.com.au

Pricing etc was done via email, final order by phone.

[Greedy]

Greedy, try this email address. I had a reply very quickly. Sherrie was the lady who looked after me.


Sherrie King
Chief Administrative Officer
07-41253531
Synforce (Aust) Pty Ltd
admin@synforce.com.au

Pricing etc was done via email, final order by phone.

Cheers mate.

[sarice]

Hey guys,I`ve had a couple of good recommendations for the Nulon High protection Diesel Formula over the last couple of weeks but am a bit dubious about it. I saw it mentioned earlier on page 2 of this thread but have never used it myself. Can anyone recommend it or otherwise?, If it`s ok I might give it a try for the next 5000K.

[Racer]

Sure mate, why not give it a go. I did and didn't really like it....my donk has had Fuchs, Valvoline Super D, Nulon and Plenty of Penrite (HPR15 & Diesel GS), they are all 15W-40 & 15W-50 (HPR15). Penrite has been the pick mate. I was going to give Caltex Delo 400 a go next change but I am going to stick with the Penrite cause I have been happy with it.

[Trilo]

Hey guys,I`ve had a couple of good recommendations for the Nulon High protection Diesel Formula over the last couple of weeks but am a bit dubious about it. I saw it mentioned earlier on page 2 of this thread but have never used it myself. Can anyone recommend it or otherwise?, If it`s ok I might give it a try for the next 5000K.

I have used it and still do the only other one I tried was the castrol magnetec, I prefer the Nulon.

[sarice]

The Nulon went in yesterday so I`ll see how it goes. The Hobart dealer oil it replaced was as black as it gets after 5K but still felt ok. I dont know what brand they used but it was fairly good and clean up to about 3500-4000K after blocking the swirl but dirtied up quickly after that.

[sierra]

I see Penrite HPR15 Diesel has changed its specs....

Density at 15oC, kg/L 0.872
Viscosity, Kinematic, cSt
at 40oC 150
at 100oC 20.1
Viscosity Index 155
Cold Cranking Viscosity, cP at -20oC 5,686
Zinc, Mass % 0.122
Phosphorus, Mass % 0.110
Sulphated Ash, mass % 1.22
Base Number, mass % 9.4

That's much better than it was before. The last 4 are the same spec as the much more expensive HPR 5 so I might go back to HPR 15 if getting Synforce in Tas is too expensive.
Good spot!