Torque settings

Discussion on servicing, engine oils, gearbox oils, diff oils etc

Torque settings

Postby myself62 on Thu May 16, 2013 2:58 pm

Had trouble finding specific Torque settings for wheels, suspension parts etc.
Would be good to have one place we can go to find all the Torque settings for our Tritons.
Maybe we can add them here :)

ill start

Triton wheel rims
Steel rims = 147Nm +/- 10 Nm
Alloy rims = 128Nm +/- 9 Nm
Bruno.
User avatar
myself62
 
Posts: 337
Joined: Sun Nov 22, 2009 2:31 pm
Location: Brisbane


 

Re: Torque settings

Postby al coholic on Thu May 16, 2013 4:57 pm

^^ Is it not listed in your vehicle handbook?? :? Pretty sure thats where i looked it up originally.


There is a couple of posts from Ultimate regarding the appropriate torque settings for the suspension U-bolts.....might just need to search ;)
The funniest thing about this particular signature is that by the time you realise it doesn't say anything important, it's too late to stop reading it.
User avatar
al coholic
 
Posts: 7823
Joined: Tue Jun 23, 2009 9:04 pm
Location: NSW

Re: Torque settings

Postby myself62 on Thu May 16, 2013 5:55 pm

Yeh it might be in the handbook and yes I have seen and used Ultimates torque settings but there isn't a "one place" where you can find all the settings.
Just thought it was a good idea :?
Bruno.
User avatar
myself62
 
Posts: 337
Joined: Sun Nov 22, 2009 2:31 pm
Location: Brisbane

Re: Torque settings

Postby Cowboy Dave on Thu May 16, 2013 6:22 pm

It's not a bad idea - just needs someone to go and find all the other torque settings posted all around the joint - feel free :D :D

the wheel nut settings appear in more than one place already.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: Torque settings

Postby myself62 on Thu May 16, 2013 6:27 pm

Rear leafs, shocks and bits
You do not have the required permissions to view the files attached to this post.
Bruno.
User avatar
myself62
 
Posts: 337
Joined: Sun Nov 22, 2009 2:31 pm
Location: Brisbane

Re: Torque settings

Postby NowForThe5th on Thu May 16, 2013 6:35 pm

Yes, not a bad idea. They are all listed in the Service Manual.

I have a spare desk and PC in the shop if someone wants to volunteer to go through the Service Manual and write them all down. Shouldn't take more than a couple of days. ;)
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Torque settings

Postby har05l on Thu May 16, 2013 6:50 pm

NowForThe5th wrote:Yes, not a bad idea. They are all listed in the Service Manual.

I have a spare desk and PC in the shop if someone wants to volunteer to go through the Service Manual and write them all down. Shouldn't take more than a couple of days. ;)


What hourly rate you paying chris :lol:
[censored]
User avatar
har05l
Platinum Subscriber
 
Posts: 5575
Joined: Wed Sep 08, 2010 5:01 pm
Location: Cambridge Park

Re: Torque settings

Postby myself62 on Sun Jun 02, 2013 7:00 am

Triton door latch components torque settings ML to current model.
You do not have the required permissions to view the files attached to this post.
Bruno.
User avatar
myself62
 
Posts: 337
Joined: Sun Nov 22, 2009 2:31 pm
Location: Brisbane

Re: Torque settings

Postby dan_4818 on Sun Sep 04, 2016 8:49 pm

ill post this in here to save starting another thread. I'm chasing the torque settings for flywheel bolts and pressure plate bolts. I have searched through my handbook and done a search on here and cant find the info. 2010 MN diesel

Cheers, Daniel
dan_4818
Platinum Subscriber
 
Posts: 248
Joined: Mon Oct 04, 2010 3:17 pm
Location: Townsville

Re: Torque settings

Postby Cowboy Dave on Sun Sep 04, 2016 10:01 pm

clutch 1.JPG


clutch 2.JPG


flywheel.JPG
You do not have the required permissions to view the files attached to this post.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: Torque settings

Postby Cowboy Dave on Sun Sep 04, 2016 10:02 pm

This page may also be handy to keep around
You do not have the required permissions to view the files attached to this post.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: Torque settings

Postby NowForThe5th on Sun Sep 04, 2016 10:23 pm

GIFrecord_2016-09-04_225342.gif
You do not have the required permissions to view the files attached to this post.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Torque settings

Postby Naff on Sun Sep 04, 2016 10:29 pm

Nice app 5th
User avatar
Naff
Platinum Subscriber
 
Posts: 4770
Joined: Sat May 17, 2008 2:00 pm
Location: Brisbane, QLD

Re: Torque settings

Postby NowForThe5th on Sun Sep 04, 2016 11:10 pm

Yeah. It's called byzanz.

Needs a little fine tuning and I cut that earlier gif a couple of seconds short. Running from CLI for now because the GUI script has an error in it that I need to fix, but has potential.

desktop-animation1.gif
You do not have the required permissions to view the files attached to this post.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Torque settings

Postby RHKTriton on Sat Nov 05, 2016 8:44 am

The wheel jockeys at the tyre joints could use some torque specs! The nuts were soo tight on my daughter's little All.
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4732
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Tightening torque values

Postby Rallyfreak on Mon Mar 05, 2018 9:36 pm

Hi. Been searching this forum for tightening torque values and sequence for my 2.5 hi output 4d56. Thisbtruck has beem battling me for years. Iv had clunking noises fixed multiple times. I swapped my ac fan 3 times. More recently though iv had my expansion tank always drained of coolant. Found out one of the watet jackets were leaking. Now after a few months, expansion tanks fills up way above full mark when i drive on highway, coolant not returning to rad as well, iv read through the forums that theres a recall to fix this issue and sometimes factory just replaces the whole engine, but. I have no such luck here in my country, im going to attempt to open it up myself, hence the need for the tightening torque and sequence, its been a fantastic truck when all is well, i would have giving up on it.

Hope somebody can help me. Many thanks
Rallyfreak
 
Posts: 2
Joined: Mon Mar 05, 2018 12:25 am

Re: Tightening torque values

Postby RHKTriton on Mon Mar 05, 2018 9:54 pm

Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4732
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Tightening torque values

Postby Rallyfreak on Mon Mar 05, 2018 10:42 pm

Many thanks. Got the info i needed
Rallyfreak
 
Posts: 2
Joined: Mon Mar 05, 2018 12:25 am

Re: Torque settings

Postby RHKTriton on Tue Mar 06, 2018 6:54 am

Now the fun begins. :lol:
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4732
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland


Return to Servicing

Who is online

Users browsing this forum: No registered users and 4 guests