Glxr Build

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Glxr Build

Postby moses on Sat May 27, 2017 8:11 am

Dual battery install

Two 10" batteries, starter is a 720cca supercharge, even though its smaller than the factory battery it has more balls which surprised me and the aux is a 80Ah supercharge all rounder.

Battery tray from piranha, said it could fit a 12" and a 10" but it was way too tight with the wiring look running in between them.

Redarc SBI12 mounted on a bit of angle.

Two Anderson plugs, one next to the back seat and one in the tub. Fridge will primarily be in the back seat strapped down but if needed can be moved to the tub.

Auto elec also made me a little clamp and plug to use as an isolator override for jump starting off the second battery if ever required. Other option was a switch in the cabin, but didn't think it necessary.

Happy with the job, very reasonable pricing and good bloke too. Anyone in Melb need an auto elec give Bell Auto Electrical in Heidelberg heights a go, he's always been super helpful, have been to him with a few cars now and nothing's too hard.
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm


 

Glxr Build

Postby moses on Sat Jul 01, 2017 8:15 am

Click to view larger pictureClick to view larger picture

Now twin locked

Next.... who knows, reduction gears, adjustable front struts, tune, tray, the list goes on. Then when I'm done it'll be time to trade it in
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby moses on Sat Nov 25, 2017 3:39 pm

Click to view larger picture


Tub removed, canopy installed
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby TheSheepKed on Sat Nov 25, 2017 5:08 pm

moses wrote:Thought I'd start a build thread, it's a 2013 manual Glx-r. Bought it brand new.




Click to view larger picture


Great thread and build. Whereabouts is this photo taken?
User avatar
TheSheepKed
 
Posts: 226
Joined: Thu Jul 06, 2017 9:58 am
Location: Victoria

Re: Glxr Build

Postby moses on Sat Nov 25, 2017 5:17 pm

Thanks mate, it's been a slow and expensive process but I'm still enjoying it.

That photo is from Kinglake area
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby desblaze on Mon Nov 27, 2017 8:07 am

Just a quick question? with your roof racks and mounting rails. I've been looking at doing this for my ML but not sure what to get. As these aren't standard for the triton, what model or code number do I need to look for?
User avatar
desblaze
 
Posts: 141
Joined: Sat Jun 05, 2010 8:58 pm
Location: Jimboomba QLD

Re: Glxr Build

Postby moses on Mon Nov 27, 2017 8:33 am

desblaze wrote:Just a quick question? with your roof racks and mounting rails. I've been looking at doing this for my ML but not sure what to get. As these aren't standard for the triton, what model or code number do I need to look for?


If you go on the rhino website you can select your car then it will give you all the options available. Mine are the RLTF Track mount system.
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby Jacobie on Tue Nov 28, 2017 5:46 am

moses wrote:Click to view larger picture


Tub removed, canopy installed
That looks awesome mate!

Sent from my MHA-L09 using Tapatalk
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Glxr Build

Postby moses on Wed Dec 13, 2017 7:18 pm

Click to view larger picture

Latest addition - MSA fridge drop slide

I have a problem.. just can't help myself
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby moses on Thu Dec 21, 2017 12:32 pm

After eBay, gumtree, Facebook, wreckers all let me down.. I found what I was after:



Click to view larger picture



Short and high 3 tonne towbar to suit my canopy.... far out it was hard work to find. And guess who had it on the shelf but didn't know what it suited, the local Mitsubishi dealer.

$300 including tongue and wiring harness (neither of which were needed)

Got a quote for my 90k service while i was there too - $2300-$2400 wow! Think I'll get another quote
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby RHKTriton on Fri Dec 22, 2017 7:47 am

That's the bar I'd hope to get when I bought the ml vr. Instead I got the one with step / bumper brackets.

Good price too there moses. The dealers aren't always the first choice but on more than once have actually been cheaper than third party sources. The accessory & spare parts industries are just as happy to take your hard earned cash as the stealers. :lol:

Your rig is looking pretty schmick.
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4750
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Glxr Build

Postby Kevin Vermaak on Fri Dec 22, 2017 9:21 am

Nice work mate.

Where did you wire the Anderson plug in the second photo to? Not so clear in the photo.

Kevin
Kevin Vermaak
 
Posts: 23
Joined: Sun Aug 30, 2015 4:27 pm

Re: Glxr Build

Postby moses on Fri Dec 22, 2017 9:22 am

Kevin Vermaak wrote:Nice work mate.

Where did you wire the Anderson plug in the second photo to? Not so clear in the photo.

Kevin


It's next to the backseat, wanted to have a spot to plug it in if I needed to put it in the cab for whatever reason
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby moses on Fri Dec 22, 2017 9:24 am

Took me ages to find that bar, and people don't understand that some parts are interchangeable between models... it all gets harder when you change things.
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby RHKTriton on Fri Dec 22, 2017 11:37 am

Yes, not always much clue behind the counter these days.

When I go for oil filters for our two zuks first question is 'what are the VIN numbers?'. Wtf? An Alto and a 2l SX4, how difficult can that be? :lol:

So how much higher does the receiver tube sit compared to the glxr version?
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4750
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Glxr Build

Postby moses on Fri Dec 22, 2017 4:14 pm

Much higher and shorter mate, here's a photo I stole off this very forum

Click to view larger picture
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby explorer.dave on Fri Dec 22, 2017 4:38 pm

Did that come with a part number Moses? Exactly what I am chasing, pretty sure I saw one in a triton parts brochure some time back but thought it may have been one of the dreaded plough bars. I also have a tray so that would be ideal.

Cheers
Better to be silent and thought a fool than open your mouth and remove all doubt.[

[b]Penrith Panthers 2021..Finally :roll:


Posts should be like mini skirts, long enough to cover the subject matter, but short enough to keep things interesting
User avatar
explorer.dave
Platinum Subscriber
 
Posts: 977
Joined: Wed Dec 18, 2013 9:32 am
Location: South Lake, Perth

Re: Glxr Build

Postby moses on Fri Dec 22, 2017 4:41 pm

Click to view larger picture
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby explorer.dave on Fri Dec 22, 2017 4:43 pm

Perfect, thanks. 8-)
Better to be silent and thought a fool than open your mouth and remove all doubt.[

[b]Penrith Panthers 2021..Finally :roll:


Posts should be like mini skirts, long enough to cover the subject matter, but short enough to keep things interesting
User avatar
explorer.dave
Platinum Subscriber
 
Posts: 977
Joined: Wed Dec 18, 2013 9:32 am
Location: South Lake, Perth

Re: Glxr Build

Postby RHKTriton on Fri Dec 22, 2017 5:30 pm

Looks like the recent bars are built to go onto both ml and mn chassis with mounting holes for each.

Do the mounts get cut off when mounting on ml?
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4750
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Glxr Build

Postby moses on Fri Dec 22, 2017 7:44 pm

Even the MQ bars would bolt on. If you're after something high and short, check the single cab towbars.
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby moses on Thu Dec 28, 2017 7:58 pm

Had a look at some high country and some very high engine temps..

Some long climbs resulted in temps up and over 110deg, had me quite concerned in some areas i really didnt fancy walking out of.

Needle was nearing the red line but no limp modes, engine lights or beeps.. but i did stop and open the bonnet to get some cooling happening once the needle started creeping up.Click to view larger picture

Sent from my SM-T355Y using Tapatalk
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby snakesoup on Fri Dec 29, 2017 9:15 am

Is your cooling system all clean and radiatior in good nik?

Sent from my SM-G900I using Tapatalk
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: Glxr Build

Postby moses on Fri Dec 29, 2017 9:44 am

snakesoup wrote:Is your cooling system all clean and radiatior in good nik?

Sent from my SM-G900I using Tapatalk


Probably not, she's seen some mud but always gets a good clean afterwards. Will have to get in there and give it an extra good clean and checkup before I get out again.
moses
Platinum Subscriber
 
Posts: 308
Joined: Sun Mar 17, 2013 2:02 pm

Re: Glxr Build

Postby RHKTriton on Fri Dec 29, 2017 8:30 pm

Check between the ac condenser and radiator cores, amazing what accumulates in this gap.

If you undo the radiator shroud and move it to the rear, it provides good access for cleaning.
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4750
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 3 guests