Jimy89 wrote:Hey mate, Digging up an old build
I was reading and saw that you went with the profender shocks, how do they go and what models are you running?
cheers
Gamedog wrote:Yasou megale,
Poli kalo to autokinito. Kai oli ti doulia tin ekanes monos sou. Ise mastoras tehnitis. Mipos xeris ean to bash plate to brostino horai epano se 2015 MN, Ama horai se parakalo mou dinis to shedio na ftiaxo ke ego ena.
Oli edo exoune trelathi me auta pou ehis kani.
Ean erthis edo kamia fora na mou pis kai tha kanonisoume taxidia.
Yiannis
salt36 wrote:Wow that does look serious mate !
Are you going a coil spring rear ?
4wd26 wrote:what length coilover?
and are you cutting up the tub to fabricate the upper link onto a roll cage type "rally cross/ trophy truck" look, so you have ultra long coilover and travel.
Anymore than 14" and you have tailshaft issues at full down travel oike when the car is on a hoist or jumpingJacobie wrote:Good stuff Stefanos!
Will be watching with interest.
triton_guru wrote:Anymore than 14" and you have tailshaft issues at full down travel oike when the car is on a hoist or jumpingJacobie wrote:Good stuff Stefanos!
Will be watching with interest.
The crossmember is the main issue not so much binding, mine had a 2 piece that i converted into a 1 piece where as the ones that have 1 piece from factory may have a different cross member?BillMcQuade wrote:triton_guru wrote:Anymore than 14" and you have tailshaft issues at full down travel oike when the car is on a hoist or jumpingJacobie wrote:Good stuff Stefanos!
Will be watching with interest.
Might be worth converting the tailshaft to Rzeppa joints at the centre and rear, off-road racing style. They give a huge range of movement, and will take the torque.
_guru wrote:Anymore than 14" and you have tailshaft issues at full down travel oike when the car is on a hoist or jumping
4wd26 wrote:I look forward to some rear flex pics once complete
stefanos wrote:llpatrick I'll sent you the draws with the dimensions for the bash plates...
I made another mount for the connectors and brake lines on the chassis,not on the rear diff...
Users browsing this forum: No registered users and 2 guests