Stefanos Triton Mods!!!!

[stefanos]

Hi all!!!
Here,I'll show you a few modifications, I've done to my Triton.

This was the the first place of my winch,but I don't like it,too much down and dangerous for my car.


So,I desided to install it to another place.I made a new plate with 6mm and 8mm steel


New wires,and I made a new control box for the solenoid and the general switch of the winch.



After I take the OE mits front bumper guard........


.............and made another one from fiberglass


I change the wire rope with synthetic.........and thats it......

[4wd26]

That is some nice fabrication work
I like the bash plate also.

[Homer]

What a good looking bit of work mate there's some talent.

[stefanos]

Thanks mates!!!

I like the bash plate also.

And my handmade bash plates!!!

[Buzzy]

Thats a brilliant bit of work and talent there.
Well done mate

[sam]

Very niiiiice well done mate

[stefanos]

Today I deside to install the new shock absorbers on my Triton

At first it was like this.35 mm strut spacer........


The OE Mits........and the new(you can see the difference!)


.........on my car.I take out the spacer,and now I have 1-1,2cm height (I had lost about 7-8mm with the winch weight)


Tomorrow,I'll install and the rear,because today it was raining too much,and the half car was outside

[Wallace]

Nice job....................

[mad992]

i like it , i like it alot

[4x4fun]

Good job, looks great.

[Diablo]

Love your work mate. now at least i know i can get a winch on the front of mine with out a bull bar

[sam]

Love the shocks was wondering what make they are .

[Fnordy]

Ditto Sam - they do look hot!!!

[stefanos]

Thanks mates!!!!I think that you like my job!!

Diablo............I hate the metal bull bars or bumpers:evil: too much weight for nothing.My next project is a fiber glass or carbon bumper..............but not now!!!!

Sam........the shocks are Amada extreme with extra subtank,especially for Tritons.The front are height adjustable.I don't have install the rear yet.If I'll install them,I'll post pics.

[stefanos]

....................and the rear shocks.

[Diablo]

very nice

[mitsifreak]

Stefanos your rig looks fantatstic well done having travelled to Greece many times i must say i never have seen a vehicle so well done its a credit to you.
Bravo malaka exis to pio kalitiro autokinito yamena
appo po ise stin ellatha?
o pateras mou ine ellinas kai yinethike stin mellistopi kastoria
toro xero ena filos stin ellatha


signomi yato scata ellinki yrama mono xero ligo alla tha matheno siga siga

Yassoo Filo
Mitsi

[stefanos]

Hi mitsifreak!!!!!
I'm from Athens,and now I have a friend in Australia!!!
Ta ellinika soy einai mia hara

Γεια σου φιλε μου!!
Στεφανος

[Damo]

Cant' read that. It's all greek to me.....

But I am interested in your carbon bar idea.....!!!!

[stefanos]

New front bash plate,without many corners,for better sliding.....


.......and I start a mod about a streering stabilizer.......





.........that was the easy part........in few days I'll mod the steering rack and connect the stabilizer.........wish me GOOD LUCK

[MLTRIT08]

Looking fantastic, nice mods Stefanos

[mattz]

Well done mate. I love that bash plate. Very neat!


Sent from my iPhone using Tapatalk

[sam]

That's about as far as I got with a stabilizer and then started to loose interest due to the prob with our
ute but figured hooking it onto the steering rack wasn't going to be easy at all .

[stefanos]

Υes Sam its not easy,but its must be done.I have order another tie rod to do the tests.....We must give a solution to this problem!!!!!(Hillux had given)

[llpatrick]

stefanos, I contacted Lin Lee and will be getting a set of the shocks soon.

Like to find out from you if you have the dimension of the bash plate set. My Thai-made bash plate is giving up and I'm looking to get a custom set done and your new set looks lovely!!

Can I also check with you, on the pic showing your rear shocks, what are the wiring for the connectors hanging above the rear diff for? My triton have 3 connectors there that is not hooked up and like to know what to do with it..