Time to update the build thread
Air on Board (AOB) compressor & 9lt tank fitted 6 months ago
the stats...
Duty cycle: 100% @ 100psi
Max working pressure: 200 psi
Amp draw: 23 amps
72lt/min max flow
real life testing...
50psi in 1min
85psi in 2 min
100psi in 2min 30sec
115psi in 2min 57sec (this is shutoff pressure)
switches back on at 85psi
tyre fill (265/70-16)
16psi-38psi in 1min 15sec
it takes 7 sec of fill time until the compressor cuts in, this takes the tyre from 16psi to 21psi
I used a toggle switch with a missile cover to stop it getting knocked on
I already had power in the tub to an anderson plug, so I doubled that up & ran a new cable to the other side & added a fuse panel to allow a couple of other add-ons later.
I bolted all the parts to the wall using nutserts (rivnuts) These are a great way to bolt on accessories & much more secure than self tappers.
from initial testing I am very happy with the system. It also gives very good pressure in short bursts using the blow nozzle.
the guy at AOB was very helpful & delivery was also very fast.
http://www.aironboard.com.au/online