Standard gls front ride height?

[Grosit01]

What's the standard ride height from centre of the wheel flare on the front of a mq gls ???

[ufc1972]

When I got my lift put in they measured 500mm before and 575mm Which really had me worried. But I later found out that the fronts are around the 535m and they must have measured it wrong. They also put the TJM centre bearing drop bracket in upside down (yes it was a TJM mechanic). I had to argue with them that it was in the wrong way. Vibration was really bad. But even with the 40mm lift in the front it was just sitting on the bump stop so I put the superpro shortened bump stop in.I have been told the the mq does not allow for much lift before the bump stops get in the way compared to previous triton but the CV angle are fine. They look to be ok and I guess the suspension will settle 5mm or so once they settle in and with the added weight of bash plates etc .

[ufc1972]

we may need to start a ride height thread at some stage I think.

[Grosit01]

Sweet mines back to 540 with a tjm outback bar and kings to hold it up to stock height again