Today I deside to do some progress on the lift kit.. At first I made brake moumts......because my Thai friend forgot to sent me!!!! As you can see there is a big difference(more angle to the ball jont and more space to the upper bump stop)
I think that I'll pant and the lower control arms blue!!
...the next step is to reinstall higher the winch,and install the new crossmeber, fix the bash plate and inner mud guards...................and paint!!
......some update here..... ......the new bumper guard and higher winch installation....
.....the lift is on.....
....the bump stop have enough space ......but I'll give a little more ( the pic is from the right side who it is higher)
.....and nextmode, is rear medium duty leaf springs because I have now too much constant load,and the ute is too soft now...............................................and the rear is lower than the front!!
From memory mate he bought a ralliart copy but it was of dubious quality so he made his own to a similar look. Can't remember now if it was fibreglass or what.
They still sell on ebay sometimes but the plumbing between the guard and the airbox is pretty much crap so you're on your own there.
The Hitchhiker's guide to the the Triton universe and NTN.
Salt,the Amada front shocks have too much (useless)travel...about 14.5mm I can feel a knock at the front right ......and the bushes are failed!!!
The rear was too long......but not much travel (ext 600mm-comp 418mm )...the new ones have 365-580mm.........and the left have a leakage!!! I was thinking to take them for a service (about 90$ per piece).............but after my advice ,a company here , have import the Profender shocks......so I bought them on cost price!!!