Fitted a pair of lights today. All up done in under 1hr.
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/09/76285f0c3c9ed6c2bb4e421ff48cf0c0.jpg)
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/09/d60c7b79398ee7bf8d4d3db43864ec36.jpg)
There very shallow mounting. I was a little worried about if they would integrate with a Safari type snorkel. The Ralliart item is the serpent type that enters through higher in the guard.
Suffice to say these lights are about 1/3 of the bulk of the standard polly carb items. The really don't protrude any further into the engine bay that the radiator support panel.
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/e498a9a3879fdf42017db3f2ea0e5147.jpg)
Plenty of room behind the inlet duct for the snorkel. They have a full plug n play loom per light. Fused power / ground to the battery, relay and adapter plugs connecting the Hi / Low beams and indicators.
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/d444954922c76ca88918d89883a418ef.jpg)
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/cce15406241b1a5bcf67c235e3ee5e3a.jpg)
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/a2edef92ca97e32e3692b37d247becf3.jpg)
They also have the servos attached and come with cables to self level the projectors. Unfortunately there's no plug in the loom to connect this too.
The Low beam is a H7 globe. I will do some research and see if I can retro fit a switch to utilise the levelling function. Then it would be legal to convert to HID !!!
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/3b7393116c8e3757bafe3cc90ce8b80b.jpg)
Wired up the LED plate lamps on the tailgate also. Just need to fit rear mud flaps to keep the popo happy and were done.
![Click to view larger picture](http://tapatalk.imageshack.com/v2/14/10/10/0cd1ec047ab5ea34a52942baa8c36eac.jpg)
Camper all hooked up for the weekend !!!