NowForThe5th wrote:Correct torque settings are:
Steel: 147Nm +/- 10Nm
Alloy: 128Nm +/- 9Nm
NowForThe5th wrote:Correct torque settings are:
Steel: 147Nm +/- 10Nm
Alloy: 128Nm +/- 9Nm
NowForThe5th wrote:128Nm +/- 9Nm for the alloys
147Nm +/- 10Nm for the steel wheels
NowForThe5th wrote:I went to put the factory wheels and tyres back on my Triton and found that the wheel nuts are missing. So.... need to get some new ones. At close to $5 each I'm not about to march down to the local Mitsubishi dealer but I do need some information on the size so I can order the right ones. I already know that they are M12x1.5 but these are available in various lengths.
Can someone run a caliper over a factory alloy wheel nut and advise the sizes. The dimensions I need are like in this drawing:
L200Shogun wrote:I have a nut in front of me. Using cheap plastic verniers. It is original one posted. ie 14 not 12mm
I have found you a set in Perth. Interested?
Users browsing this forum: No registered users and 20 guests