GLX-R Alex wrote:Can someone put up the scangauge settings procedure for a xgauge to display boost. I've done it previously but it's now no showing up.
Calblitzen wrote:I've set up a few of the x gauges, will try to remember this week to list them. The boost one I use if I remember correctly takes into account the atmosphere pressure.
tritonliz wrote:Just setting up Scangauge for first time. I put in price per litre etc for fuel and filled up tank..havn't got down to quarter full yet to refill and put other info in but if I do press Gauge all it shows is a load of squares, as though some info should be there but isn't// is this right? Doesn't seem so...
Cowboy Dave wrote:When you're first calibrating the fuel fill ups the trick is to enter an incorrect figure which is half way between reality and what the scangauge guesses. So if the scangauge says you used 40 litres, and you fill it with 20, enter 30 on the scangauge. I don't know why this works but it will get the scangauge to accurate consumption figures much quicker than using proper numbers.
But Liz sounded like she had more fundamental problems with hers since none of the other gauges were working.
Which reminds me, if you didn't already know Liz, once on the gauges display page, each of the 4 tops buttons will cycle through the available gauges so maybe if you didn't choose what you wanted to see first it wouldn't display properly?
NowForThe5th wrote:Haven't been able to find the codes for the air temp sensor at the MAF, however, for those with a Scangauge, these codes apparenty work to give commanded EGR
Commanded EGR(%)
TXD: 07E0012C
RXF: 0441052C0000
RXD: 2808
MTH: 006400FF0000
NAM: EGR
Users browsing this forum: No registered users and 7 guests