Hey all,
Apologies for a second post on the same issue.
Has anyone with a DP Chip had the ECU light (the yellow engine shaped light on the tacho dial) come in at high speed?
Mine has come on twice now.
Both times the light came on (at 110klm+), I pulled over and the engine cut out. Both times it retstarted fine and the engine ran as normal but the light stayed on. The first time the light went off after 10 minutes, the second time after a much longer time.
My chip is set at 8.
I rang DP today and was told that the engine was "getting too much power" and that's why the light came on.
They recommended that I turn it doemn to 5 for a bit and then up to 6.
Anyone had similar problems?