Cooper STT tyres 265/70R17

[MR09GLXR]

i'll take a stab in the dark....is anyone running Cooper STT tyres 265/70R17st if so how do you find them.
befor i blow the $370 a tyre someone may know a bit about them

Regards

[Wallace]

befor i blow the $370 a tyre

You said it.......................blow the $370 a tyre .........

[subi_man]

moved to tyres/wheels section

[Stu]

my brother is running them on an r51 pathfinder, first time off road with them at 18psi a rock went straight through between 2 tread blocks. Personal opinion I wouldn't buy coopers there are just as good if not better tyres around for alot less

[trouble]

I also know a person running these tyres and has done some decent 4wdriving never a problem also driving an R51 Pathy.

[Peruano]

This seems typical of Coopers from what I've heard. Some people swear by them, others swear at them. I've had several people tell they will never again buy them as they have had punctures consitantly. Others have travelled through the outback and never had an issue.
Not sure if they have quality control issues or some batches are made in different plants around the world but it seems there is a problem with some users.... (of the two reliable sources that told me they would never buy again, one was running ATR and the other STT)

[Adz]

MR09GLXR - Not to hijack the thread, but if you're interested in BFG AT's, call Jax in Fyshwick, they're fitting them for $319 per corner.

[MR09GLXR]

Thanks all for your thoughts and idears. I am going to shit can the factory 17's go down a size to 16's in a steel wheel (better off road and load carrying) then go up a size in tyre wall to make up the rolling size..
This will leave me with a cheaper tyre thats better off road and a lot easer tyre to find.

Again thanks guys..Tristan

[jop]

PM sent

[Racer]

MR09GLXR - Not to hijack the thread, but if you're interested in BFG AT's, call Jax in Fyshwick, they're fitting them for $319 per corner.

Phucken Hell!!!

I paid 205 a corner 2 year ago for my Hilux !!!!!!

[Adz]

MR09GLXR - Not to hijack the thread, but if you're interested in BFG AT's, call Jax in Fyshwick, they're fitting them for $319 per corner.

Phucken Hell!!!

I paid 205 a corner 2 year ago for my Hilux !!!!!!

I know what you mean Racer....that was the cheapest too...one bloke quoted me $400 per corner!

[Still-Lurking]

I just got quotes 393 a corner on Micky Thompson ATZ's in that size..

Thanks for the blingy 17' wheels Mitsubishi..

Ah well, they should be better than the Yokahama-hardly-hangs-ons ..

[4wd26]

I just got quotes 393 a corner on Micky Thompson ATZ's in that size..

Thanks for the blingy 17' wheels Mitsubishi..

Ah well, they should be better than the Yokahama-hardly-hangs-ons ..

I did offer the MTZ's in that size for crappy originals.

Check out marketplace

It is good to see your "still lurking"- second thoughts????