Servicing & Inspections in NSW

Discussion on servicing, engine oils, gearbox oils, diff oils etc

Servicing & Inspections in NSW

Postby timbo0279 on Thu Jan 22, 2015 8:31 am

Servicing & Inspections in NSW
timbo0279
Platinum Subscriber
 
Posts: 25
Joined: Mon Nov 11, 2013 12:36 pm


 

Re: Servicing & Inspections in NSW

Postby timbo0279 on Thu Jan 22, 2015 8:34 am

Hi everyone,

We have a ML Triton (2007) and we are moving to Sydney from Perth.

Looking for a recomended mechanic that will be able to maintain our vehicle (3.2l Turbo Diesel), understands the ins and outs of 4x4's, diesel etc etc etc and will be understanding of mod's that may have been made (EGR). I am looking to get a rego inspection done pretty quickly (blue slip???) so we can transfer the rego.. maintenance will follow...

Any help would be greatly appreciated.

Tim
timbo0279
Platinum Subscriber
 
Posts: 25
Joined: Mon Nov 11, 2013 12:36 pm

Re: Servicing & Inspections in NSW

Postby peterdeg on Thu Jan 22, 2015 11:20 am

Sydney's a pretty big place. Can you narrow it down a little?
Peter
2011 MN GLX-R manual.
Some pics here.
Build thread here.

4WD History: 2004 NP GLS Pajero DiD. 2002 Freelander Td4. 1996 Subaru DL wagon. Learnt in a 1980 F100.
User avatar
peterdeg
Platinum Subscriber
 
Posts: 287
Joined: Tue Mar 15, 2011 6:07 am
Location: NW Sydney

Re: Servicing & Inspections in NSW

Postby al coholic on Thu Jan 22, 2015 11:27 am

timbo0279 wrote:we are moving to Sydney from Perth.

You poor bugger :( :lol:
The funniest thing about this particular signature is that by the time you realise it doesn't say anything important, it's too late to stop reading it.
User avatar
al coholic
 
Posts: 7823
Joined: Tue Jun 23, 2009 9:04 pm
Location: NSW

Re: Servicing & Inspections in NSW

Postby timbo0279 on Wed Jan 28, 2015 1:55 pm

Sorry guys, we are now in Glenwood, near Castle Hill.. but happy to travel to get the best advice / service...
timbo0279
Platinum Subscriber
 
Posts: 25
Joined: Mon Nov 11, 2013 12:36 pm

Re: Servicing & Inspections in NSW

Postby snowman on Wed Jan 28, 2015 2:00 pm

timbo0279 wrote:Sorry guys, we are now in Glenwood, near Castle Hill.. but happy to travel to get the best advice / service...


Mate as far as a dealership goes use Eagers Mits at Castle Hill they are on corner of Victoria Ave and Windsor Road.

That said, they probably wont assist in EGR bypasses etc. but keep in mind for MUT3 stuff etc.

If i find a good mechanic around here i will tell you.....and i have lived in this area my whole life. :roll:

Gary's Auto are very good but pricey. Call them. they should do rego checks (they specialise in auto electrical) and i highly recommend them for that but i have never used them for mechanical.
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: Servicing & Inspections in NSW

Postby timbo0279 on Wed Jan 28, 2015 2:49 pm

Thanks Snowman!! appreciate the help!!

You wouldn't happen to have an address for Gary's Auto??
timbo0279
Platinum Subscriber
 
Posts: 25
Joined: Mon Nov 11, 2013 12:36 pm

Re: Servicing & Inspections in NSW

Postby snowman on Wed Jan 28, 2015 2:52 pm

http://www.garrysautoservices.com.au/location.html

ask for Michael or Trevor - they are the owners.
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: Servicing & Inspections in NSW

Postby timbo0279 on Wed Jan 28, 2015 3:05 pm

Champion, thanks snowman!! :D
timbo0279
Platinum Subscriber
 
Posts: 25
Joined: Mon Nov 11, 2013 12:36 pm

Re: Servicing & Inspections in NSW

Postby Hazeldean1 on Sun Apr 12, 2015 3:30 pm

Hi All,
Just wondering if anyone can recomend a good mechanic for a triton in the northern rivers?

Thanks
Hazeldean1
 
Posts: 2
Joined: Thu Jun 09, 2011 8:07 pm


Return to Servicing

Who is online

Users browsing this forum: No registered users and 4 guests