Buzzy wrote:Been at the local, bit piss wrecked atm
Mate I do have 285's but not as a spare, ya cant fit em
I have one of my BFG's as my spare.
McNODDY wrote:Because Ive got no idea what the hell I'm doing is there anything special I should tell him?
McNODDY wrote:oh and just roughly roughly, how long does this job take, normally normally?
McNODDY wrote:Pre Dobinsons install
FR - 493
FL - 492
RR - 516
RL - 530
McNODDY wrote:OK
The dobis are in and...
FR -608
FL - 612
RR - 635
RL - 630
That's 115mm - 120mm Lift
wheel alignment still to come...
if I knew how to put up pics I would.
I presume it is a combination of what Strut and what coil you have, a would think that a Dobi's Triton coil would not do that in a Dobi's shock, they should be properly matched, get your part no's and compare to what is mentioned or call them I reckon.
McNODDY wrote:sorry bout the small pics, havent got a hold on this yet..
daryn wrote:McNoddy, do you plan on putting a bar or bar/winch on soon ?
I reckon its because you have constants which would normally be used with a bar combo I think. You need some more weight up front to bring it all down. Or if you are keeping it with the nudge you need a different coil.
I think you're onto it Daryn. The constant spring was designed with bar and dual batteries in mind from memory.
To get your bump stops in, get the front end flexing then install one side. Get it flexing the other way to get the other one in. Thanks to Silver for that tip.
McNODDY wrote:You mean by flexing just jack one side up ?
Users browsing this forum: No registered users and 19 guests